The MX180T features two outputs with a power range of 0 to 30 V at 0 to 6 A, as well as a third output with a power range of 0 to 5.5 V at 0 to 3 A. Each output offers simultaneous measurement with high resolution, switchable remote sensing, and an individual output switch. The MX180TP includes USB, RS232, GPIB, and LXI-compatible LAN interfaces. These allow for complete remote control and remote reading, supported for high-level applications by an IVI driver. The Aim-TTi MX series offers impressive power density by combining high-frequency switch-mode pre-regulation with linear post-regulation to deliver performance close to that of a fully linear design. Excellent phase and load regulation is tuned for low noise and good settling time. To be used in a variety of applications, each output has more than one range. Outputs one and two can provide either 60 V/3 A or 15 V/10 A as alternatives to 30 V/6 A, while output three can provide 12 V/1.5 A. When higher power is required, outputs one and two can be combined to deliver up to 360 watts as either 30 V/12 A, 15 V/20 A, 60 V/6 A, or 120 V/3 A from a single output.