EUR91,89
AOC AM420B
Table, 34", 9 kg
Questions about AOC AM420B
What would you like to know?
0 questions and answers
Helpful answer
Yes.
Helpful answer
On 22" Monis (48 cm wide), the arms protrude almost 28 cm forwards. With 24" (53 cm wide) you will be able to save a few cm, which is due to the geometry. However, I don't think this is the ideal model for reaching as far back as possible to the edge of the table, even if it is very stable and also adjustable. I think you'd be better off with a design similar to Neomount's FPMA-DCB100D (table, 27", 10 kg).
Galaxus
1 month ago
Helpful answer
Yes, the mount is also suitable for VESA 75x75. It supports both 75x75 mm and 100x100 mm, as stated on the manufacturer's website and in the product data.
Automatically generated from the .
Galaxus
2 months ago
Helpful answer
The AM420B has a maximum weight capacity of 9 kg per monitor arm, supporting monitors weighing between 2 and 9 kg each.
Automatically generated from the .Galaxus
2 months ago
Helpful answer
Yes, the mount is compatible with 2 ASUS TUF Gaming VG257QMR5A monitors, as long as they support VESA 75x75 mm or 100x100 mm, are under 34" and weigh up to 9 kg per monitor. The mount supports exactly 2 monitors up to 34" with max. 9 kg payload and VESA 100x100 mm (also 75x75 mm).
Automatically generated from the .
Helpful answer
The clamp goes between 10mm to 80mm tabletop thickness
Galaxus
2 months ago
Helpful answer
The AM420B is compatible with 2 AOC 25G42E monitors as the mount supports up to 2 monitors with a maximum size of 34" and up to 9 kg per monitor. The 25G42E has a screen diagonal of 24.5" and weighs well under 9 kg, so both monitors can be mounted without any problems as long as they are equipped with VESA 75x75 mm or 100x100 mm.
Automatically generated from the .Galaxus
2 months ago
Helpful answer
The mount supports monitors from 17" to 34" with a weight of 2 to 9 kg per monitor, so it is generally compatible with 27" monitors as long as they are within the weight specifications. You should check the exact weight of your AOC 27G4HRE to ensure that both monitors together do not exceed the capacity.
Automatically generated from the .Galaxus
2 months ago
Helpful answer
Yes, you can position a monitor upright (vertically). The mount offers a 360° rotation range, which enables portrait orientation.
Automatically generated from the .Galaxus
2 months ago
Helpful answer
The mount is compatible with 2 AOC 27G42E monitors as long as they have VESA 100x100 mm, are under 34" and weigh up to 9 kg per monitor. Check the exact specifications of your monitors to be sure.
Automatically generated from the .
Galaxus
3 months ago
Helpful answer
Yes, the maximum load per arm is 9 kg. This mount supports a weight of 2-9 kg per monitor and is designed for monitors up to 34" with VESA 75×75 or 100×100 mm.
Automatically generated from the .
Galaxus
3 months ago
Yes, two 32" monitors fit comfortably as the mount supports monitors up to 34" and up to 9 kg per monitor. It is designed for a side-by-side arrangement with sufficient extension of 455 mm for flexible positioning. Check the weight and VESA (100x100 mm) of your monitors.
Automatically generated from the .
Galaxus
3 months ago
The arms of the mount have an extension length range of 455 mm. This allows you to position your monitors close to you on a 1 m deep table, as the arms can be flexibly extended forwards up to approx. 45.5 cm.
Automatically generated from the .
Helpful answer
No, except maybe if you let the bottom screen touch the desk top...
Galaxus
4 months ago
Helpful answer
No, it is not recommended to use a 9.4 kg monitor with this stand, as the maximum payload is 9 kg. Exceeding this limit may compromise the stability and safety of the stand.
Automatically generated from the .
We sell several Ofinto desks, so I don't know exactly which model you mean. However, I have not yet seen a desk from this brand that would not work with this bracket.
Galaxus
9 months ago
Helpful answer
Yes, it is possible to mount a 34-inch monitor straight and a 24-inch monitor vertically next to each other with this mount. The mount supports two monitors with a maximum size of up to 34.02 inches and a load capacity of up to 9 kg per arm. The mechanism also allows 360° rotation, a swivelling range of -90° to +90° and a tilt range of -15° to +90°, which enables one monitor to be aligned vertically. The prerequisite is that both monitors are VESA-compatible (75 x 75 mm or 100 x 100 mm) and do not exceed the weight per arm.
Automatically generated from the .
Galaxus
11 months ago
Helpful answer
Yes, you can attach two 27" monitors to this mount as it is suitable for monitors up to 34 inches and supports a weight of up to 9 kg per arm. The mount allows you to flexibly adjust the monitors so that you can place one in the centre and the other to the right. The mechanics of the mount ensure that the monitors remain stable, even if they are not positioned in the centre.
Automatically generated from the .Galaxus
1 year ago
Helpful answer
Yes, you can attach a 34-inch monitor and a 27-inch monitor to this mount. The mount supports up to two monitors with a size of 17 to 34 inches and a weight of up to 9 kg per monitor. Both monitors must support VESA mounting sizes of 100 x 100 mm or 75 x 75 mm, which is the case for most monitors. It is advisable to check the specific specifications of the monitors to ensure compatibility.
Automatically generated from the .
On the AOC product page you can see pictures of the C-clamp system which is mounted through a hole. This is why the C-clamp system is also narrower than the plate above it that goes on the table.
Galaxus
1 year ago
Yes, it is possible to mount two Curve screens with a size of up to 34 inches, as the mount is designed for monitors up to 34.02 inches and supports two monitors. The maximum payload per arm is 9kg, which may be sufficient depending on the weight of the Curve screens. Make sure that the screens have the VESA mounting grid of 100 x 100 mm or 75 x 75 mm to mount them correctly.
Automatically generated from the .Galaxus
1 year ago
The AOC AM420B monitor dual arm mount allows two monitors to be mounted side by side, but with some limitations in terms of space requirements and height adjustability.
### Space requirement
- The mount has a stretch length range of 455 mm, which means that the monitors can be placed in a desired position, but it will still take up a certain amount of space towards the back, especially if the monitors are to be placed in a close position to each other.
### Height adjustability
- The height adjustability of the mount is 250 mm and the maximum height is 495 mm. This makes it possible to adjust the monitors from a higher position down to the table. You can therefore adjust your 27" monitors all the way down to the table to achieve the optimum viewing angle.
Overall, the AOC AM420B is a flexible solution that both saves space and offers high ergonomics and adaptability.
Automatically generated from the . Helpful answer
approx. 9cm at the top, almost 7cm at the bottom with the locking screw
Galaxus
1 year ago
Helpful answer
Yes, it is possible to use a 34" ultrawide monitor and a 32" monitor together with the AOC AM420B monitor mount, but there are some conditions that must be met:
- VESA mounting compatibility: both the 34" ultrawide monitor (e.g. AOC CU34G2XP/BK) and the 32" monitor (e.g. AOC CQ32G2SE/BK) must support VESA mounting sizes of 100 x 100 mm or 75 x 75 mm, which applies in this case.
- Maximum monitor size: The AM420B mount supports monitors ranging in size from 17" to 34", which covers both monitors.
- Maximum weight: Each monitor may weigh a maximum of 9 kg, which applies to most monitors of this size.
- Arrangement: The mount is designed to hold two monitors side by side, not on top of each other. It is therefore safe to arrange the monitors side-by-side.
It is advisable to check the specific specifications of the monitors and the mount directly with the manufacturers or in the user manuals to confirm compatibility.
Automatically generated from the .Galaxus
1 year ago
The AOC AM420B monitor mount offers multiple mounting methods to attach it to your desk.
- You can attach the mount with a clamp (C-Lamp) as well as with a grommet method (drill holes in the table).
- The grommet method allows the bracket to be screwed directly into holes drilled in the table, providing a firm and secure attachment.
So you have the choice between these two methods, depending on your preference and the conditions of your table.
Automatically generated from the .
Galaxus
1 year ago
Yes, the AOC Monitor 24G4XE is probably compatible with the AOC Monitor Mount AM420B, but there are a few things to check:
- The AOC 24G4XE supports VESA mounting, which is a requirement for compatibility with the AM420B. The AM420B supports VESA mounting sizes of 100 x 100 mm and 75 x 75 mm.
- The 24G4XE monitor weighs less than 9kg, which is within the weight range of the AM420B, which supports up to 9kg per monitor.
However, it is advisable to check the specific specifications of the mount and monitor directly with AOC or in the user manuals to confirm compatibility.
Automatically generated from the .
Galaxus
1 year ago
Helpful answer
The Samsung Odyssey G5 34" is likely to be compatible with the AOC AM420B monitor mount if certain conditions are met:
- Check if the Samsung Odyssey G5 34" offers VESA mounting compatibility (100 x 100 mm or 75 x 75 mm) as the AM420B supports these VESA dimensions.
- Make sure that the monitor does not weigh more than 9kg as this is the maximum payload of the mount.
It is advisable to check the specific specifications of the monitor and mount directly with the manufacturers or in the user manuals to confirm compatibility.
Automatically generated from the .
Helpful answer
Yes, it should work. But note that the smaller the monitor, the further back the mounting arm will be. This means that the desk may no longer be able to stand very close to the wall
Hello, yes, the monitor can be mounted on this stand.
30 of 49 questions