The microphone boom is compatible with microphones that have a standard 3/8" or 5/8" thread. The HyperX QuadCast S uses a 3/8" thread, so it fits the microphone boom with these thread sizes. The microphone boom offers a stable table mounting and flexible adjustment options that are suitable for the HyperX QuadCast S.

To find out if the Razer Seiren Mini microphone is compatible with the LogiLink AA0127 professional microphone arm, check the technical specifications. The Razer Seiren Mini can be used with a microphone arm, but it requires an adaptor to fit the standard mount (5/8" male to 3/8" female) if required. If the LogiLink AA0127 arm uses a similar mount, it may be compatible, but it's best to check the arm's exact specification to confirm.

Hi, according to the LogiLink data sheet 10-60mm. But the 65mm may also work as bkeleanor writes. Greetings

Hi Thomas In principle, all microphones with the classic adapter will fit. According to Logitech's homepage, the adapter is supplied (can also be seen in the pictures). However, the microphone is not connected directly, but remains attached to the strange "bracket" and this is mounted. -->"Mounting: Included stand or any bracket arm (required adapter included)"

According to the description, the "Samson Q2U" can be used via a clamp on a microphone stand and table stand. The 'LogiLink microphone arm' does not have a clamp but a 5/8" to 3/8" thread adapter for microphone attachment. If the "Samson Q2U" does not have this mounting bracket, then it will require a suitable accessory clamp that has a 5/8" to 3/8" thread adapter.

Unfortunately I don't have the equipment to measure precisely, but with a double metre I measured a diameter of 13mm and a length of 28mm.

Yes, it can be used

With the spider of the TC 777, this is probably unfavourable. A spider would have to be found that fits on the thread. The suspension restricts the mobility of the arm. I would rather use another arm.

Unfortunately, I can no longer answer this, because I had returned this product. But if the shure sm7b has an internal thread, then yes.

Yes

You will normally need the spider if it was not supplied with your Yeti X. If not, no worries about the support.

Hello, yes I have the same mic on it without problem. It is very strong! Greetings

Yes

I use it with an Hyper X Quad S and it holds precisely where I want the microphone. You can adjust the stiffness (if that makes sense) of each of the arms section. If you move it quite a lot like I do, every now and then you'll have to turn to tighten the "screws" between sections but it ain't a big deal.

Yes, that works. In addition, I have this one to suppress vibrations: Elgato Shock Mount

Yes

Yes, as long as you still have the adapter piece of the microphone for the thread on the microphone arm.

Have the Rode NT1, which is about the same weight and it fits like a glove :)

According to LogiLink up to max 2kg (catalogue PDF is available here: http://logilink.eu/content/support/kataloge.htm) I have the Elgato Wave-3 on it and hang my Sennheiser HD559 on it when I don't need it.... Holds well so far

Hello Pericek1, Yes, the Blue Yeti fits on this microphone arm. You might just have to remove the adapter if you have one inside. I also have a Blue Yeti on my arm.

I guess it should be aluminium. The joints are made of plastic. Everything very robust!

Yes. Slightly loosen the wing screw on the joint of the spider for the Nt1. Mount the spider on the arm and adjust/lock it with the included adapter for alignment.

Should actually fit, otherwise there are enough adapters which are usually supplied with a microphone or the arm.