Roborock Saros 10 with fixed water connection
22000 Pa, Wiping cloth
Questions about Roborock Saros 10 with fixed water connection
What would you like to know?
0 questions and answers
Unfortunately, we are currently unable to sell this product through us as we do not have a corresponding offer from our suppliers.
Unfortunately, there is no news on this.
We don't know yet. As soon as we are able to offer them, we will add the corresponding suppliers to the shop.
These are relatively thin hoses with a diameter of approx. 5 mm. For the waste water, this hose can simply be inserted into the waste water pipe in parallel with a normal washing machine drain. A connection coupling is supplied for the supply line, which can be installed in a water pipe and into which the supply line can be coupled.
The Roborock Saros 10 with fixed water connection has the technical possibility to be connected to a permanent water pipe, but the necessary water connection hoses/adapters for the house installation are not automatically included in the package, you need extra connection material to actually set up the fixed water connection.
Sorry, I have a coloured concrete floor
But this will be very clean after the application
To connect the Roborock to the app, you have to connect the hoover to the wifi. I have never tried using the vacuum cleaner without the app. According to Roborock it is possible but of course only with the rudimentary settings. Unfortunately, I can't answer the second question.
Swiss plug
Galaxus
9 months ago
Helpful answer
The robot is 7.98 cm high. The dustbin empties automatically into the base station. The detergent is filled via a tank built into the station, without the need to open a top lever. This compact height means it can be slid under a washbasin drawer if there is more than 8 cm of free space.
Automatically generated from the .
Unfortunately, there is currently no exact information available on the dimensions of the fresh water and waste water hoses of the Roborock Saros 10 with water connection.
Helpful answer
Except for what is needed for the power cable plug (approx. 3cm at the back), a few cm to the side or top for the hoses depending on the installation radius, only to the front for moving in and out approx. 80cm-1m
Helpful answer
You have 30 days from the date of purchase to return the device. Under the following link you will find all information about our return policy: https://www.galaxus.ch/de...
Helpful answer
The Roborock Saros 10R is expected to be available from the end of August.
This version is without water connection. Unfortunately, we do not currently have a purchase offer for the one with water connection, which is why we cannot offer it.
As far as I can tell, the vacuum cleaner can ONLY connect to a 2.4Ghz network. 5Ghz is not recognised at all. The vacuum cleaner can therefore not be used. Nowadays, however, the vast majority of routers can transmit 5 and 2.4 ghz networks simultaneously. The routers from Swisscom, Sunrise, Wingo and co. can do this without any problems. this may simply have to be switched on on the Management side of the router. Hope that helps :)
Galaxus
11 months ago
Helpful answer
1. programming for parquet and tiled floors: You can programme the Robot Vacuum Cleaner to vacuum parquet first and then tiled floors by adjusting the cleaning schedules in the app. You can define specific rooms or zones and specify the cleaning sequence.
2. mop behaviour when moving from flagstones to parquet: When the Robot Vacuum Cleaner moves from flagstones to parquet, it can automatically adjust the mop system. In the app, you can set the chassis to be raised before parquet cleaning to protect the mop system.
Automatically generated from the .
Unfortunately, we do not yet have a delivery offer for the Saros 10R. However, it is already available in the shop: Roborock Saros 10R cleaning robot (vacuum robot)
It is best to activate the notification so that you receive an e-mail as soon as it is available.
We currently have no news about this. We ask for your patience and understanding.
Helpful answer
We put the Saros 10 under our sofa. The sofa is approx. 8 cm high at the edge, but more like 7 cm in the centre, where it can push the fabric upwards. We have a Saros 10.
Galaxus
1 year ago
The instructions state that the connection can withstand a maximum of 4 bar. It is therefore advisable to use a pressure reducing valve if the water pressure is higher to prevent damage.
Automatically generated from the .
The dust bags are the same as for the S 8 Max V Ultra Roborock dust bag for S8 MaxV Ultra, Qrevo MaxV (6 x) here the rolls https://www.galaxus.ch/de/s2/product/roborock-brosse-duodivide-staubsauger-roboter-zubehoer-57541259. According to the manufacturer, these should also fit Roboparts mops for Roborock QRevo MaxV / Qrevo - pack of 8 Further accessories will be added as soon as they are available from our suppliers.
This is possible, see instruction 043 under the following conditions: https://support.roborock.com/hc...
Helpful answer
If still current:
The depth of the upper part of the station is 26 cm. The width is 40.9 cm as stated.
There needs to be approx. 70 cm of space at the top (from the floor to the top edge of the lid), as the lid has to be opened to remove the tanks.
Helpful answer
Unfortunately, we do not have any personal user experience with this product, but I am happy to forward your question to the Community, perhaps a Community member can help you.
The version with water connection is available in our range under the following link:
Roborock Robot VC Saros 10 Black, refill+drainage S10RD52-00 (vacuum robot)
The current delivery time for this item is approx. 6 - 12 weeks.
29 of 29 questions