External height: 200 mm
Outside width: 800 mm
Outer depth: 120 mm
Dimensions outside: 200 x 800 x 120 mm
Housing material: Steel
Transparent door: No
IP Protection: IP66
Chassis plate: No
Shield connection plate: No
Color: Grey
Series: Spacial SBM
Fastening set: No
Indoor mounting type: Panel

Three profiles for width 800 mm, two for bus box (three screws for width greater than 400 mm), four for flat and access boxes (six screws for width greater than 400 mm). Spacious SBM industrial boxes. Schneider Electric's Spacial SBM steel enclosures are available in three versions and are designed for use in industrial machinery and building applications. The wall mounting enclosures have a one-piece rectangular body with folded gutters on the front and two or three drilled profiles for the installation of mounting plates and DIN rails on the rear. The mounting holes have a diameter of 12.5 mm. The housing cover has a polyurethane seal and two, three, four, or six threaded screws with half turn (depending on version). An M6 x 16 ground terminal bolt is welded into the cover to provide a potential terminal for the enclosure.

Properties and advantages: 28 different sizes available, using accessories from the expansion box even up to 42 sizes; depths of 80 mm and 120 mm available, with or without pre-installed FL21 cable glands. Protection class IP66, meaning the enclosures are dustproof and offer protection against strong jets of water and heavy seas. External mechanical impact resistance of up to IK10 (20 joules) - this means that the wall box can withstand a 5 kg object dropped from a height of 40 cm. Can be installed with a screwdriver. Direct mounting from the rear or using external mounting eyelets. Inside and outside protected by grey (RAL 7035) painted polyester. Attractive and robust design to protect against sensitive electronics.

Typical applications: The Schneider Spacial SDB series is suitable for use in underground garages, road, and railway tunnels.