Series: XY2CE
Reset Button: Yes
Contact Configuration: 2-pole Normally Closed
Display Type: Cable Tension
Max Cable Span: 2 x 35 → 2 x 100 m
Max Current: 3 A ac, 270 mA dc
Max AC Voltage: 240 V
Max DC Voltage: 250 V
Housing Material: Stainless Steel (Cover), Zamak (Housing)
Number of Cable Entries: 3
Size of Cable Glands: ISO M20, PG 13.5
Width: 106 mm

Dual Emergency Stop Pull Rope Switch XY2CED from Telemecanique. The dual emergency stop pull rope switches XY2CED are designed to reduce the risk of injury to individuals and damage to machines or production products. These dual pull rope switches feature double anchoring points and can handle setups with brackets and pulleys up to 2 x 100 m. They can be activated by one person with a single motion when a standard emergency stop function is not available, and will also trigger if the release wire breaks.

The switches are equipped with forced opening contacts, with the activation of the switch occurring through forced operation. The switch locks in the triggered position (Normally Open safety contacts open). The normally closed contact is solely for signaling purposes. It includes a reset button that allows the safety contacts to be closed again. Restarting the machine must only be done by manually operating a control device within the machine's start circuit, which is located at a distance from the release wire switch. The recommended distance between cable holders is 15 m.