Your data. Your choice.

If you select «Essential cookies only», we’ll use cookies and similar technologies to collect information about your device and how you use our website. We need this information to allow you to log in securely and use basic functions such as the shopping cart.

By accepting all cookies, you’re allowing us to use this data to show you personalised offers, improve our website, and display targeted adverts on our website and on other websites or apps. Some data may also be shared with third parties and advertising partners as part of this process.

Legal noticePrivacy notice

Best selling Camera remote controls from Pixel

This page always stays fresh and updates automatically.

1. Pixel Timer Radio Trigger TC-252/S1 for Sony

With the Pixel Timer Remote Trigger TC-252/S1, you can remotely control your Nikon camera. This remote trigger allows you to set your camera for a single photo, burst mode, or a series of photos (max. 1 second) and shots where you can determine the shutter speed. If your camera supports a long exposure time, you can also press the button on the remote to open the shutter. When you release the trigger button, it will close again. It is also possible to use the TC-252 remote trigger as a timer. This timer can be set between 1 and 59 seconds, with a maximum of 99 photos. The 2 AAA batteries provide a standby time of over three years.

If you have a different camera, please contact us for a suitable product. 

2. Pixel RC-201 remote control Wired Digital camera Press buttons

The Pixel RC-201/DC0 cable is suitable for various Nikon DSLR cameras. This cable can be used to remotely control a camera with ease. It is 110 cm long and easy to connect. Once connected, you can tap the button on the remote. If you press the button all the way down, your camera will take a picture. It is also possible to turn the dial so that the camera shutter remains open, allowing your camera to safely capture both still images and videos.

If you have a different camera, please contact us for a suitable product.

The DC0 cable is attached to the transmitter and cannot be replaced with another cable. 

3. Pixel Timer Remote Control Wireless TW-283/E3 for Canon

The Pixel Timer Remote Control Wireless TW-283/E3 for Canon is a versatile and practical accessory for photographers who want to control their camera from a distance. With a range of over 80 meters, this device allows you to trigger the camera without any physical contact. This is especially useful for long exposures, group photos, or wildlife shots where it's important not to disturb the camera. The remote supports multiple operating modes, providing flexible handling and adaptation to various shooting situations. Its user-friendly operation and the ability to set timers and continuous shooting make the TW-283/E3 an essential tool for creative photographers.

- Supports five different shooting modes, including single and continuous shooting
- Offers bulb shooting for long exposures with manual control of the shutter speed
- Adjustable timer for delay shooting with a delay of 1 to 59 seconds
- Timer schedule shooting allows programming of up to 99 hours, 59 minutes, and 59 seconds
- Lightweight design weighing only 52.6 grams for easy handling. 

4. Pixel Wired Remote Trigger RC-201/N3 for Canon

The Pixel RC-201/N3 release cable is suitable for various Canon DSLR cameras. The cable with remote control can be used to operate and trigger a remote camera. The cable is 110 cm long and easy to connect. Once you have connected the devices, you can tap the button on the remote control. If you press the button all the way down, your camera will take the picture. It is also possible to turn the dial, allowing your camera to keep the shutter open.

If you have a different camera, please contact us for a suitable product. 

5. Pixel Remote release Wireless RW-221/DC0 Oppilas for Nikon

With the Pixel Wireless Trigger RW-221/DC0, you can remotely trigger your Nikon camera via Wi-Fi. The range of this station is 100 meters. By using multiple receivers, you can trigger these cameras simultaneously on one channel. The receiver is equipped with a standard 1/4" thread, allowing you to attach it to a tripod next to the camera. With the hot shoe connection, it can also be mounted on top of the camera.

If you have a different camera, please contact us for a suitable product. 

6. Pixel Radio Flash Trigger Set Pawn TF-364 for Olympus

The Pixel Radio Trigger Set Pawn TF-364 is a wireless remote control for Panasonic and Olympus cameras as well as camera flashes. This system allows you to wirelessly control not only the studio flash but also your camera flash and even your camera itself. The wireless control operates via a radio frequency between the transmitter and receiver. The TF-364 kit supports shutter speeds of up to 1/250s.

The TF-364 is compatible with:

Panasonic: DMC-FZ50, DMC-FZ50K, DMC-FZ50S, DMC-FZ30, DMC-FZ30K, DMC-FZ30S, DMC-FZ20, DMC-FZ150, DMC-FZ20K, DMC-FZ20S, LC-1, L1, L10, G10, G2, G1, GF1, GH1, GH2, G3, Gx1, G5, FZ1000 II, DMC-FZ200.

Leica: DIGILUX2, DIGILUX3.

Olympus: E620, E600, E550, E520, E510, E450, E420, E410, E400, E30, E100, E-PM1, E-M5, E-PL2, E-PL3, E-P3, EP-2, EP-1, SP-590UZ, 570UZ, SP565UZ, SP560UZ, SP550UZ, SP510UZ, SP810UZ, SZ-30MR, SZ-20, SZ-11, XZ-1, E1, E3, E10, E20, E5. 

7. Pixel Receiver TF-364RX for Pawn TF-364 for Olympus

The Pixel Receiver TF-364RX for Pawn TF-364 for Olympus is suitable for the Pawn TF-364 transmitters. With this additional receiver, multiple flashes can be controlled with the TF-364. The flash can be attached to the hot shoe of the receiver. The receiver features a 1/4 thread, allowing you to mount it on a light stand or umbrella holder.

With this receiver, you can trigger studio flashes, flash units, and cameras. However, to use these functions, you will need a transmitter. 

8. Pixel TW-283/DC2

The Pixel Timer Remote Control Wireless TW-283/DC2 is a versatile and powerful accessory for Nikon cameras that allows for wireless triggering from a distance of over 80 meters. This remote is ideal for photographers who want to control their camera from afar without having to touch the shutter directly. With various operating modes, the TW-283/DC2 offers flexible handling for different shooting situations. Whether for single shots, continuous shooting, or long exposures, this remote adapts to the users' needs. Additionally, the timer mode allows for precise scheduling of shots, which is particularly beneficial for timed photography. Its compact design and lightweight make the remote a practical companion for on-the-go use.

- Supports five different shooting modes, including single and continuous shots
- Offers BULB shooting for custom shutter speeds
- Timer function allows delays from 1 to 59 seconds and the capture of up to 59 photos
- Timer Schedule Shooting for time intervals of up to 99 hours, 59 minutes, and 59 seconds
- Includes connection cable and manual for easy use. 

9. Pixel Timer Radio Trigger TC-252/DC0 for Nikon

With the Pixel Timer Remote Trigger TC-252/DC0, you can remotely control your Nikon camera. This remote trigger allows you to set your camera for a single photo, burst mode, or a series of photos (max. 1 second) and shots where you can determine the shutter speed. If your camera supports a long exposure time, you can also press the button on the remote to open the shutter. When you release the trigger button, it will close again. It is also possible to use the TC-252 remote trigger as a timer. This timer can be set between 1 and 59 seconds, with a maximum of 99 photos. The 2 AAA batteries provide a standby time of over three years.

If you have a different camera, please contact us for a suitable product. 

10. Pixel Transceiver King Pro TX for Canon

This Pixel Transceiver King Pro TX for Canon can be used as an extension for the Pixel King Pro for Canon. The transceiver functions as both a transmitter and a receiver. It supports automatic TTL communication with the camera, as well as completely manual settings. Additionally, you can set EV corrections, the synchronization mode (1st curtain, 2nd curtain, high-speed sync), zoom settings for the flashes, and flash bracketing.

The transceiver features a hot shoe connection on the top for a Canon camera flash. On the bottom, it is equipped with a hot shoe connection for a Canon camera. With an optional sync cable, you can use the transceiver in combination with a studio flash.

You can find out which camera models and camera flashes the King Pro Transceiver is compatible with in the specifications. 

Product order
See all products

Relevant lists