Best Gossen products in the Metrology category
On this page you'll find a ranking of the best Gossen products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Gossen Probe Metrawatt I-SK12 Measuring So
Intelligent measuring probe 12 m with remote triggering and exchangeable test probe, illumination of the measuring point, and multi LED as status display of the current measurement, as well as storage.
2. Gossen Metrawatt Z227C Kelvin Set, Z2
Gossen Metrawatt Z227C Kelvin Set, Z227C.
3. Gossen GOSS diagnostic plug and test adapter
The GOSS diagnostic plug and test adapter from Gossen is a highly advanced measuring device specifically designed for testing AC charging points in accordance with the standards IEC 61851-1 and VDE 0122-1. This device enables electrical professionals to efficiently verify the functionality of AC charging points in charging mode 3 at Type 2 sockets or with permanently attached Type 2 cables. The PROFITEST H+E EXPERT CHECK provides a comprehensive solution for diagnostics and electrical safety by combining both standard-compliant electrical testing and functional verification in a single device. This reduces the need for additional devices such as multimeters or oscilloscopes, saving both time and costs. The diagnostic tester is user-friendly and allows for safe testing, even when the charging process cannot be initiated, thus avoiding misunderstandings regarding the causes of malfunctions.
- Testing of AC charging points in charging mode 3
- Comprehensive electrical and functional verification in one device
- Reduces the need for additional testing devices
- User-friendly and safe to use
- Calibrated to factory standards with certificate.
4. Gossen GMCI probe
Gossen Metrawatt Z516T I-SK4 PROFITEST PRIME measuring probe 1pc.
5. Gossen Metrawatt USB X-TRA Interface
This adapter connects multimeters with a serial IR interface from the METRAHIT E- and S-series, as well as X-TRA, to the USB interface of a PC. The adapter enables data transfer between the multimeter and the PC. Measurement values or measurement data files can be transmitted both online and offline, depending on the multimeter.
6. Gossen Test adapter with single and 3phase plug
Accessories type: Adapter
Test adapter VL2 E is designed for testing devices and cables with test equipment according to DIN VDE 0701-0702. This adapter is intended for performing measurements and tests on electrical devices and extension cables with CEE connectors in combination with test equipment. The following quantities can be measured with the adapter for the respective tests:
- Electrical devices:
- Protective conductor resistance
- Insulation resistance (measurement of L1, L2, L3, and N, short circuit on PE)
- Equivalent leakage current
- Extension cables:
- Protective conductor resistance
- Insulation resistance (measurement of L1, L2, L3, and N, short circuit to PE)
- Simple functional test for single and three-phase extension cables, including testing for conductor continuity, short circuit, and polarity reversal (clockwise) with a rotary selector switch.
7. Gossen Measuring adapter F516G Luminance
The luminance attachment with a 15° measurement angle can also be used as an unclassified luminance measuring device. Luminance is measured in candelas per square meter (cd/m²) or footlamberts (fL) and is related to the brightness effect of a luminous or reflective surface.
8. Gossen Metrawatt Z611R METRALINE A3-63 Test adapter 1 pc.
Three-phase adapter for testing devices and CEE sockets. The three-phase adapter allows the connection of testing devices to 5-pole CEE sockets. The METRALINE three-phase adapter series makes your investment decision easier. With adapters perfectly tailored to your requirements, electrical professionals can master daily tasks with their testing devices. The connection of a testing device is simple and secure via 4 mm safety sockets. The lightweight, compact, and robust design of the three-phase adapter (63 A) enables the connection of a testing device to verify the effectiveness of protective measures. The adapter complies with the 5-pole CEE socket with a rated current of 63 A and allows testing of protective measures through five touch-protected 4 mm safety sockets. It is suitable for measurement category CAT IV 415 V Type A3-63. The robust and compact design is also suitable for use in harsh environments. Delivery includes: 1x METRALINE CEE three-phase adapter 5-pole, 63 A and 1x supplementary sheet.
9. Gossen Mavolux Compact illuminance meter
The Mavolux Compact illuminance meter from Gossen is a precise and compact device for measuring illuminance. It is ideal for professionals in lighting technology, photography, and other fields where accurate light measurement is required. The device offers a wide range of measurement functions, ranging from 0.1 Lux to 199,900 Lux, and allows for both automatic and manual range switching. With a measurement rate of 2 readings per second and an integrated memory for up to 100 readings, it is particularly user-friendly. The clear LCD display with backlighting ensures that values are easily readable even in low light conditions. The Mavolux Compact comes with a neoprene case, a carrying strap, a battery, and a user manual, making it a practical companion for on-the-go use.
- Measurement range from 0.1 lx to 199,900 lx
- Automatic and manual range switching
- Integrated memory for up to 100 readings
- LCD display with backlighting
- Automatic battery check and shut-off after 4 minutes.
10. Gossen Metrawatt METRISO PRIME Isolat
Technical features: Wide measurement range from 10 kΩ to 1 TΩ. Very clear logarithmic display. Measurement voltages: 100, 250, 500, 1000, 1500, 2000, 2500, 5000 V. Measurements up to 1000 V according to DIN VDE 0413. Measurement range 100 kΩ to 100 MΩ (1000 V). Voltage measurement up to 2000 V DC/AC. Guard connection eliminates surface currents. By replacing the battery compartment with the hand crank inductor, the battery-operated METRISO PRIME becomes a hand-operated device.
