Best selling Microphone accessories from RØDE
On this page you’ll find a ranking of the best Microphone accessories from RØDE. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. RØDE Interview GO
The Rode Interview Go is a practical adapter that converts the Rode Wireless GO transmitter into a compact handheld microphone for reports and interviews. The robust connection for the cold shoe of the Wireless GO ensures that the microphone remains securely attached to the device. The windscreen reduces plop noise and protects the capsule from wind during outdoor recordings.
2. RØDE MagClip GO
The clothing can be clamped between the magnet and clip for maximum flexibility. The MagClip GO can even be used to discreetly place the microphone on an object, in a scene, or on stage to record dialogues.
3. RØDE Colors Set 2
A practical four-color set that ensures clear identification of the microphones used during recordings. The set is designed for the Wireless GO and Wireless GO II, as well as the Lavalier GO microphone.
Colors 2 includes differently colored windshields for four Lavalier GO microphones and corresponding rings for their connectors. Additionally, there are four color clips for the Wireless GO transmitter modules and a sheet with matching stickers for the receiver modules included in the set. This way, you can easily see at a glance which person is being recorded on which channel or device. The participants will also appreciate that they always receive the same microphone, especially for hygiene reasons.
Colors 2 is also ideal in conjunction with the free podcast/streaming software "RØDE Connect," as it uses the same color coding.
Features
- Four colors (pink, green, blue, orange)
- Four Lavalier GO windshields with color identification
- Four identification rings for the Lavalier GO jack plug
- Four identification clips for Wireless GO transmitters
- Identification stickers for Wireless GO receiver modules
- Ensures clear identification during recordings with multiple microphones.
4. RØDE LAV clip - set of 3
Rode Lav-Clip clamp for lavalier microphones, 3 pieces. Microphone holder clip for Rode lavalier microphones to attach a lavalier microphone to clothing. Ensures optimal microphone alignment and provides a discreet appearance. The Rode Lav-Clip is designed for securing Rode lavalier microphones. This set includes 3 Lav-Clip holder clamps. Attach your lavalier microphone in the wire holder of the Lav-Clip to keep it fixed in the correct, aligned position. The clamps provide reliable support on your clothing and ensure optimal positioning of your lavalier microphone. The Lav-Clip is suitable for all Rode lavalier microphones. Note: Delivery does not include a microphone. Package contents: 3x Lav-Clip.
5. RØDE Wireless GO II TX
Compact module (4 x 4 cm) that allows the Wireless GO II Single System to be expanded with a second transmitter - ideal for interviews. The integrated miniature condenser microphone delivers crystal-clear audio quality. An external microphone can also be connected to the 3.5 mm TRS socket, with the Wireless GO II TX functioning purely as a transmitter. The built-in audio memory in the module allows for up to 40 hours of onboard recording for backup purposes.
The wireless transmission occurs over the license-free and registration-free 2.4 GHz band, with a range of 200 m in clear line of sight. The internal LiPo battery provides power for at least 5 hours. Charging, configuration, firmware updates, and backup transfer are done via USB-C. The package includes two furry windshields for outdoor recordings (one as a spare) and a 30 cm USB-C to UBC cable. The manufacturing of the Wireless GO II TX takes place in RØDE's precision facility in Sydney, Australia.
6. RØDE Lav-Headset (Large) Headset holder for lavalier microphones
The Lav is an ergonomic headset designed for the flexible use of a RØDE Lavalier or smartLav+ microphone. It allows you to position the microphone close to the mouth. The holder, made from durable spring steel, does not wear out even with frequent use in the toughest conditions. The integrated cable management at the back ensures a secure fixation of the microphone cable, preventing it from coming loose. The Lav headset is available in three sizes for a perfect fit.
7. RØDE FlexClip GO
Practical set with three different special holders for the transmitter module of the Wireless GO or Wireless GO II radio link.
The small Wireless GO transmitter module already has an integrated clamp ex works, with which it can be attached to clothing. However, there are cases where this would be too conspicuous in the picture. This is where the FlexiClip GO comes into play with its three flexible special mounts:
Firstly, the MagClip GO magnetic mount, which allows the transmitter module to be attached without wrinkles - with the magnet either under or over the fabric.
Second, the VampireClip. This needle holder is intended for thicker fabrics and is ideal, for example, for attaching the transmitter module to the inside of the lapel of a jacket.
And thirdly, the CrossClip, which you attach to the button placket of a shirt or blouse. The transmitter module can then be conveniently removed and reattached, for example during breaks in filming.
Features
- Three flexible special holders
- for inconspicuous mounting of the transmitter module
- MagClip GO: Magnetic holder for wrinkle-free placement
- VampireClip: Needle holder for thicker fabrics
- CrossClip: for attaching to the button placket.
8. RØDE Vxlr+
Rode VXLR+ XLR TRS Mini Jack Adapter Model: VXLR+ integrated voltage converter. Reduces voltage from 12-48V to 3-5V Plugin Power. XLR3M to 3.5mm TRS mini jack (with thread for connecting an HS2 headset) enables the operation of HS2, Videomic Go, Videomicro on professional XLR microphone inputs with phantom power. With belt clip. Length: 66mm. Weight: 60g.
The Rode VXLR+ XLR adapter regulates phantom power (12-48V) down to plugin power (3-5V) using an integrated voltage converter, allowing the connection of small microphones to professional XLR connections with phantom power. For small microphones like the Videomic GO, Videomicro, or HS2 headset, the voltage of 12-48V is too high, and the microphones would be damaged if attempted to be operated via a professional XLR connection. With the VXLR+, these microphones can be easily connected to a professional mixer or to an XLR input of a video camera. The 3.5mm mini jack connection features a thread that fits the Rode HS2 headset, preventing accidental disconnection of the cable.
Included: 1x Rode VXLR+.
9. RØDE NT45-C
The RØDE NT45-C is a high-quality small diaphragm interchangeable capsule specifically designed for use with various RØDE microphones. This capsule offers precise sound reproduction and is ideal for professional applications in music and audio production. With its robust construction and ease of use, the NT45-C is a reliable choice for sound engineers and musicians. The capsule is compatible with the microphone models NT4, NT5, NT55, and NT6, making it a versatile accessory for different recording needs. Its compact dimensions and lightweight design also make it easy to transport and integrate.
- Compatible with RØDE microphones NT4, NT5, NT55, and NT6
- Robust construction for professional applications
- Lightweight and compact for easy handling and transport.
10. RØDE MiCon-7
The RODE MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic, and Lavalier microphones and a wide range of wireless systems. The MiCon-7 is designed to connect to Lectrosonics transmitters SM Series, UMa Series, LMa Series, and UM450. Lectrosonics and the Lectrosonics products listed are registered names and trademarks owned by Lectrosonics Inc.
Product order
See all products