Best Brodit products in the Tablet holder category
On this page you'll find a ranking of the best Brodit products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Brodit 713387 Holder Galaxy Tab Active 3&5
Brodit device holder for Samsung Galaxy Tab Active 5 SM-X300, SM-X306B, and Galaxy Tab Active 3 SM-T570/SM-T575. Active holder for a secure installation, suitable for devices with original skin. Features a ball joint and USB Host Type-A. Equipped with an easy-switching system and 2.7A charging via pogo pins. Works with 12/24 volts and has AMPS and VESA 75 mounting holes.
This Brodit device holder is specifically designed for the mentioned devices and is precisely shaped. The control buttons of your device remain accessible and are not obstructed. With the ball joint, you can tilt the holder 15° in any direction to optimally align it within the user's line of sight. The two-part mounting solution consists of a Brodit device holder and a Brodit ProClip. The Brodit ProClip is a universal mounting platform that can be securely attached to the vehicle without damaging the dashboard.
2. Brodit Bracket, TS, with lock, FZ-A2
Passive holder with tilt swivel and spring stud locking.
With your device in a holder attached in your car, you will always have it within easy reach. Safe, neat, and convenient! You can connect a charging cable to the surfpad when it is in the holder.
The holder is mounted onto a tilt swivel, allowing you to adjust the angle to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder to the desired position. It is easy to place the surfpad in the holder and take it with you when leaving the car.
Tablets (surfpads) should not be installed onto a car’s dashboard if they block the view or key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for smaller devices like mobile phones and GPS devices, and is not intended for large devices like tablets. In some vehicles, the ProClip has an extra firm fit and can be used for the installation of a tablet. If you want to place a tablet on the car’s dashboard, each combination of tablet and car must be examined in detail to determine if such an installation is possible. Consideration should be given to the position, how firmly the ProClip is in place, and the size of the tablet you wish to use. Brodit will not provide recommendations for such installations.
Installing a tablet onto a vehicle’s dashboard is always done at the customer’s own risk. Brodit recommends using tablets on the car’s headrest, installed onto a Brodit headrest mount.
3. Brodit Holder Universal passive H:120-135/D:max. 9mm
Brodit Universal Passive Holder H: 120-135/D: max. 9 mm. Adjustable passive holder with tilt and swivel functionality. Keep your device in a holder in your car, so it's always in sight and within reach. Safe, tidy, and convenient! A charging cable can be connected.
4. Brodit 739266 Bracket Zebra ET50/51/55/56 10.1
The Zebra ET50 10.1 Module Upgrade Mount with Lockable Feature and AMPS/VESA hole pattern is the ideal choice for businesses that prioritize security and flexibility. This mount has been specifically designed for the Zebra ET50 series with a 10.1-inch diagonal screen and offers a robust security option through an integrated lock that effectively protects your device from theft. Thanks to its thoughtful design, this mount is perfect for use in demanding work environments such as warehouses, logistics centers, or field service. The AMPS/VESA hole patterns allow for easy installation on various surfaces, whether in vehicles or at stationary workstations, providing maximum flexibility in usage. A notable advantage is its compatibility with the original backplate and hand strap of the Zebra device. This facilitates integration into existing workflows and ensures a seamless user experience. Since the mount is not intended for charging the device, the mobility of the tablet remains fully intact without disrupting the workflow. Rely on this well-designed and high-quality mounting solution to enhance security and efficiency in your business. Invest in the future of your work processes with the Zebra ET50 10.1 Module Upgrade Mount with Lockable Feature.
5. Brodit 511914 - Tablet/UMPC - Passive mount - Car - Black
The optimal solution for mounting your ET55 10.1 in the car! Your ET55 10.1 can be easily inserted into and removed from the Brodit holder with one hand. Thanks to the adjustable ball joint, the display of your ET55 10.1 is always optimally readable. The Brodit holder for the ZEBRA ET55 10.1 is open at the bottom, providing free access to all connections of the ET55 10.1. This holder is precisely designed for your ZEBRA ET55 10.1. The ET55 10.1 Brodit mount can be installed on a Brodit ProClip or directly onto the dashboard. The mounting plate comes with 4 holes and 4 screws and has a mounting area of approximately 50x42 mm. The operation of the original ET55 10.1 cables, such as for charging or headset use, is guaranteed.
6. Brodit 713225 Bracket Galaxy Tab Active 2&3
The mount for the Samsung Galaxy Tab Active 2 with charging station via pogo pins and USB port support is the perfect solution for businesses such as taxi companies or delivery services that require a reliable and practical tablet holder. This mount allows for secure attachment in the vehicle, ensuring that your tablet is always within reach and easily visible. The specially tailored fit ensures that the Galaxy Tab Active 2 sits securely and can be conveniently charged via pogo pins—ideal for long workdays on the go. The sleek design of the mount seamlessly integrates into the vehicle's interior, creating a tidy environment. To avoid cable clutter, it is recommended to use cable management from the accessory range. In addition to the charging option via pogo pins, the mount features a USB port that facilitates the connection of additional devices. Please note that a separate USB car charger adapter is required for multimedia integration with the vehicle. With the easy-switching system, the mount can be quickly and easily replaced in the event of a device change or warranty case, without the need to re-route the wiring. This saves time and effort during installation and maintenance. The mount is made from high-quality ABS/Acetal plastic, making it particularly robust, and the integrated ball joint allows for flexible adjustment for the optimal viewing angle. This mount is a reliable companion for daily professional use.
7. Brodit 739287
This holder is the perfect choice when you want to have your device securely locked in place and still easily accessible. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the device from the holder, you need a key (two keys are included). Attach the holder to any flat surface or a pedestal mount in a truck, distribution vehicle, warehouse, etc. You have full access to the camera and all buttons and outlets when the device is in the holder. Made of high-grade ABS/Acetal plastic. Color: black. Made in Sweden.
Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. The installation of a device in a vehicle is always done at the customer's own responsibility.
8. Brodit 712386 Holder Galaxy Tab Active 3&5
The Brodit PDA holder for tablets is perfect for using your devices in the car. The cigarette lighter charging cable, which is permanently integrated into the holder, allows you to conveniently charge your device while driving. For safety reasons, install this holder on consoles that are firmly mounted in the car. It is not recommended to install it on the dashboard with Brodit ProClips, as these consoles are designed for smaller devices.
9. Brodit Charging cradle Extra
The holder for the ET56 10.1 with charging function via pogo pins has been specifically designed for demanding industrial use. Its precisely tailored design not only ensures a secure attachment of your device but also allows for continuous and gentle charging through integrated pogo pins. At the same time, the rear-mounted USB port provides an uncomplicated connection for additional accessories. The construction made from high-quality acetal plastic ensures extra stability and durability, making this holder reliable in challenging environments such as warehouses, logistics centers, and transport vehicles. Thanks to the flexible AMPS and VESA hole patterns, it can be easily mounted on various surfaces while keeping all essential functions, such as the camera, buttons, and ports, readily accessible. With the holder for the ET56 10.1 featuring a charging function via pogo pins, you are choosing a thoughtful solution that optimizes your daily operations. The quick and straightforward installation allows for seamless integration into your existing system, ensuring that your device is always ready for use. Rely on this combination of robust technology and ease of use to achieve maximum efficiency even under the toughest conditions.
10. Brodit Holder
Brodit device holder for Samsung Galaxy Tab Active 5 SM-X300, SM-X306B and Galaxy Tab Active 3 SM-T570/SM-T575. This active holder is designed for fixed installation and is compatible with devices featuring the original skin. It includes a ball joint and an easy-switching system. The holder provides a 2.7A charge via pogo pins and is suitable for 12/24 volts. It is equipped with AMPS and VESA 75 mounting holes.
This Brodit device holder is specifically made for the mentioned devices and is precisely shaped. The control buttons of your device remain accessible and are not obstructed. With the ball joint, you can tilt the holder 15° in any direction to optimally align it within the user's line of sight. The two-part mounting solution consists of a Brodit device holder and a Brodit ProClip. The Brodit ProClip is a universal mounting platform that can be securely attached to the vehicle without damaging the dashboard.
