EUR229,67
Bresser Wetter Center 7-in-1
Question about Bresser Wetter Center 7-in-1
Who can help? I can set up the station and the data from the sensors is displayed. What won't work is logging in to PWL (https://app.weathercloud.net/) although the data in the weather station setup has all been entered correctly. (Weathercloud_ID, KEY etc.) When checking the MAC address in the router, everything is also OK. I'm frustrated... :-) I expected much more from a station in this price segment
Helpful answer
Hello,
The fact that it doesn't work isn't linked to the weather station, but to an error during configuration. I read that you entered the MAC address of your router. It's not the router's address that should be given, but the station's, which is on a label behind the station. Similarly, the coordinates of your location must be entered in the correct format. Apart from these little pitfalls, the rest takes care of itself.
All the best.
The fact that it doesn't work isn't linked to the weather station, but to an error during configuration. I read that you entered the MAC address of your router. It's not the router's address that should be given, but the station's, which is on a label behind the station. Similarly, the coordinates of your location must be entered in the correct format. Apart from these little pitfalls, the rest takes care of itself.
All the best.
The station expects a connection to the PWL website. If you search for it using Google, you will end up on the Weathercloud website.
Try typing the PWL address directly into your browser: https://proweatherlive.net.
Then create your account and connect your weather station to it. Good luck.
Try typing the PWL address directly into your browser: https://proweatherlive.net.
Then create your account and connect your weather station to it. Good luck.
I fought for days - in the end it worked. I was close to sending the statiion back. In my case it was because the statiion didn't connect to the WLAN. All over again... Configure the station via internal IP - check the WLAN and enter the station ID. If the prediction data appears on the station, you've done it. I can't say any more from afar - if it works... FGA