EUR130,09
RØDE Ai-1
USB
Question about RØDE Ai-1
Former user
6 years ago
Will the RØDE Ai-1 be recognised as an audio device under a 64bit Linux operating system so that it can be used with an XLR microphone (NT1)? Unfortunately, there is no answer to this question. The software: Ableton Live 9 Lite is irrelevant for me and is not used. I am only interested in the microphone functionality. Thanks in advance.
Hi, wir koennen es Bestaetigen, dass Ai-1 Interface laeuft mit 32- und 64-bit Linux.
Folgend diverse Outputs (S/N ist in den letzten 6-Stellen mit * versehen). Wir hoffen Ihnen damit weiter geholfen zu haben:
32-Bit debian 10 (buster) output:
[13040.196299] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[13040.407349] usb 2-1: New USB device found, idVendor=19f7, idProduct=000a, bcdDevice= 1.23
[13040.407353] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13040.407355] usb 2-1: Product: RODE AI-1
[13040.407357] usb 2-1: Manufacturer: RODE Microphones
[13040.407359] usb 2-1: SerialNumber: DD******
[13040.417391] hid-generic 0003:19F7:000A.0003: hiddev0,hidraw2: USB HID v1.11 Device [RODE Microphones RODE AI-1] on usb-0000:00:1d.0-1/input3
[13040.600419] usb 2-1: 1:1: cannot get freq at ep 0x82
[13040.605433] usb 2-1: 2:1: cannot get freq at ep 0x3
[13045.679580] usbcore: registered new interface driver snd-usb-audio
64-Bit debian 9 (stretch) output:
83328.197357] usb 3-1.2: new full-speed USB device number 35 using ehci-pci
[83328.309083] usb 3-1.2: New USB device found, idVendor=19f7, idProduct=000a
[83328.309087] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[83328.309091] usb 3-1.2: Product: RODE AI-1
[83328.309093] usb 3-1.2: Manufacturer: RODE Microphones
[83328.309096] usb 3-1.2: SerialNumber: DD******
[83328.312021] hid-generic 0003:19F7:000A.000B: hiddev0,hidraw2: USB HID v1.11 Device [RODE Microphones RODE AI-1] on usb-0000:00:1a.0-1.2/input3
[83328.427071] usb 3-1.2: 1:1: cannot get freq at ep 0x82
[83328.428063] usb 3-1.2: 2:1: cannot get freq at ep 0x3
usb-device output:
T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 43 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=16 #Cfgs= 1
P: Vendor=19f7 ProdID=000a Rev=01.23
S: Manufacturer=RODE Microphones
S: Product=RODE AI-1
S: SerialNumber=DD******
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
Gnome Sound:
Digital Output (S/PDIF) - RODE AI-1
Analog Output - RODE AI-1
Analog Input - RODE AI-1
lsusb -v output:
Bus 003 Device 035: ID 19f7:000a RODE Microphones
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 16
idVendor 0x19f7 RODE Microphones
idProduct 0x000a
bcdDevice 1.23
iManufacturer 1 RODE Microphones
iProduct 2 RODE AI-1
iSerial 3 DD******
bNumConfigurations 1
Folgend diverse Outputs (S/N ist in den letzten 6-Stellen mit * versehen). Wir hoffen Ihnen damit weiter geholfen zu haben:
32-Bit debian 10 (buster) output:
[13040.196299] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[13040.407349] usb 2-1: New USB device found, idVendor=19f7, idProduct=000a, bcdDevice= 1.23
[13040.407353] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13040.407355] usb 2-1: Product: RODE AI-1
[13040.407357] usb 2-1: Manufacturer: RODE Microphones
[13040.407359] usb 2-1: SerialNumber: DD******
[13040.417391] hid-generic 0003:19F7:000A.0003: hiddev0,hidraw2: USB HID v1.11 Device [RODE Microphones RODE AI-1] on usb-0000:00:1d.0-1/input3
[13040.600419] usb 2-1: 1:1: cannot get freq at ep 0x82
[13040.605433] usb 2-1: 2:1: cannot get freq at ep 0x3
[13045.679580] usbcore: registered new interface driver snd-usb-audio
64-Bit debian 9 (stretch) output:
83328.197357] usb 3-1.2: new full-speed USB device number 35 using ehci-pci
[83328.309083] usb 3-1.2: New USB device found, idVendor=19f7, idProduct=000a
[83328.309087] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[83328.309091] usb 3-1.2: Product: RODE AI-1
[83328.309093] usb 3-1.2: Manufacturer: RODE Microphones
[83328.309096] usb 3-1.2: SerialNumber: DD******
[83328.312021] hid-generic 0003:19F7:000A.000B: hiddev0,hidraw2: USB HID v1.11 Device [RODE Microphones RODE AI-1] on usb-0000:00:1a.0-1.2/input3
[83328.427071] usb 3-1.2: 1:1: cannot get freq at ep 0x82
[83328.428063] usb 3-1.2: 2:1: cannot get freq at ep 0x3
usb-device output:
T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 43 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=16 #Cfgs= 1
P: Vendor=19f7 ProdID=000a Rev=01.23
S: Manufacturer=RODE Microphones
S: Product=RODE AI-1
S: SerialNumber=DD******
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
Gnome Sound:
Digital Output (S/PDIF) - RODE AI-1
Analog Output - RODE AI-1
Analog Input - RODE AI-1
lsusb -v output:
Bus 003 Device 035: ID 19f7:000a RODE Microphones
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 16
idVendor 0x19f7 RODE Microphones
idProduct 0x000a
bcdDevice 1.23
iManufacturer 1 RODE Microphones
iProduct 2 RODE AI-1
iSerial 3 DD******
bNumConfigurations 1