Pattex Assembly metal
325 gPrice in EUR including VAT
Delivered between Wed, 15.4. and Sat, 18.4.
More than 10 pieces in stock at supplier
More than 10 pieces in stock at supplier
Free shipping starting at 30,–
Product details
Pattex Montage Metal is a strong adhesive for bonding metal alloys, glass, mirrors, and tiles. Thanks to its powerful mounting adhesive properties, it is the perfect product for the assembly and bonding of metal, metal alloys, non-ferrous metals, and almost all types of materials. The elastic adhesive joint absorbs vibrations and is weather-resistant, allowing for strong bonds both indoors and outdoors. Combined bonding, such as bonding stone to metal, is also possible. Pattex Montage Metal is ideal for bonding metal alloys and mirrors, with an initial adhesion of up to 150 kg/m², as well as for bonding ferrous and non-ferrous metals.
type of adhesive | Assembly adhesives |
Material application | Glass, Metal, Tiles |
Area of use | Inside, Outside |
Documents | Safety data sheet.pdf |
Item number | 23325466 |
Manufacturer | Pattex |
Category | Glue |
Manufacturer no. | PTRTR |
Release date | 5.12.2022 |
Colour | Transparent |
Exact colour description | Transparent |
Material group | Metal |
Material | Polymer |
type of adhesive | Assembly adhesives |
container shape | Cartridge |
Heat resistant up to | 80 °C |
Additional properties | Weatherproof |
processing time | 15 min |
Material application | Glass, Metal, Tiles |
Area of use | Inside, Outside |
CO₂ emissions | 1,33 kg |
Climate contribution | EUR 0,12 |
Items per sales unit | 1 pcs. |
Length | 230 mm |
Weight | 325 g |
Product Safety |
Length | 23.80 cm |
Width | 6.80 cm |
Height | 5.20 cm |
Weight | 388 g |
Instructions for use | Substrate preparation: Almost all absorbent and non-absorbent materials are suitable as substrates, except PE, PP, PTFE, etc. The substrates must be solid, clean and free of release agents. Remove release agents with a suitable solvent, e.g. alcohol, or sand the surface. A prerequisite for the adhesive to set is the absorption of small amounts of moisture (from the air or from one of the materials to be bonded). Always check coatings for adhesion and remove if necessary. Opening: To open the tube for the first time, screw the complete cap firmly onto the tube. Application: Apply a thin layer of adhesive to one side. The thinner the adhesive film, the faster and stronger the bond. Join the parts immediately and press together for approx. 5 - 30 seconds (depending on the material). Correction is possible in the first few seconds. Cleaning: Clean with alcohol or solvent immediately after employees. Wipe dry. |
Specifications may include unverified machine translations.
GHS07 Health hazard- H317 May cause an allergic skin reaction.
14-day cancellation right
30-day right of return if unopened
30-day right of return if unopened
No warranty
Legal concerns