Best selling Glue from UHU
On this page you'll find a ranking of the best UHU products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. UHU Plus Endfest 163 g
Solvent-free two-component adhesive based on epoxy resin for high loads. The processing time is up to 90 minutes, with curing time and final strength being temperature-dependent. It sets after 12 hours at room temperature. The adhesive bond is impact-resistant, aging-resistant, and moisture-resistant. It is also available in a user-friendly dual-chamber syringe that allows for easy application of both components in the correct mixing ratio.
Materials: Bonds metals, glass, porcelain, ceramics, wood, marble, stone, concrete, thermosetting plastics, fiberglass-reinforced plastics, hard PVC, rubber, and rigid foams like Styrofoam. Not suitable for bonding large glass surfaces, polyethylene, or polypropylene.
Processing/Application Instructions: The bonding surfaces must be dry and free from dust and grease. Roughen smooth surfaces. Mix binder and hardener in a 1:1 ratio (strands of equal length). Apply adhesive on one side or both sides for rough materials. Fit parts together precisely without pressure. The working time (pot life) is approximately 90 minutes. Curing time and final strength depend on temperature, with strength being achieved at room temperature in about 12 to 24 hours.
Temperature-Curing Strength:
- 20 °C: 12 hours, 1200 N/cm²
- 40 °C: 3 hours, 1800 N/cm²
- 70 °C: 45 minutes, 2000 N/cm²
- 100 °C: 10 minutes, 2500 N/cm²
- 180 °C: 5 minutes, 3000 N/cm².
2. UHU handicraft glue
The solvent-free adhesive sets quickly and is always ready to use thanks to the practical stand-up tube, which allows for complete emptying. Furthermore, UHU's transparent drying provides an especially appealing look for creative crafting and decoration projects.
3. UHU Ultra mounting adhesive
For almost all materials and substrates, 100% waterproof and weather-resistant, very fast thickness build-up: hand strength after 30 minutes already, ideal for almost all assembly applications, such as mirrors, stair treads, window sills, skirting boards, metal plates and strips, wood and batten constructions, insulation and drywall panels in interior construction, suitable for façade and ceiling construction, for hand strength after 30 minutes At least one adhesive surface must be absorbent or porous Materials adheres metal, wood, stone, porous concrete, mirrors, glass, ceramics, plaster, cork, PVC, ABS, polystyrene, PU hard foam, etc. to almost all materials and substrates.
4. UHU The all-purpose glue
All-purpose glue in the "FLEX CLEAN" tube, 20 g. Liquid, crystal clear. Can be temporarily adjusted, no paper wrinkling. Soft and robust special tube. This crystal clear, liquid synthetic resin adhesive from UHU is the perfect solution for a wide range of applications around the home, office, model building, crafting, and more. It bonds quickly and permanently to many materials including wood, plexiglass, porcelain, glass, or leather. When gluing paper, it does not cause any wrinkling. The adhesive bond can be adjusted shortly after application. This special tube is particularly soft yet exceptionally robust, allowing for precise, clean, and drip-free gluing.
5. UHU Plast Spezial
Special adhesive for bonding polystyrene parts and a variety of other plastics in model building. It features a very fine metal needle and has a very thin liquid consistency.
6. UHU Plus Schnellfest
Solvent-free 2-component epoxy resin adhesive for high demands. The processing time is approximately 90 minutes. The curing time and final strength depend on the temperature. At room temperature, it cures after 12 hours. It is impact-resistant and resistant to aging and moisture.
Also available in a user-friendly double syringe that allows for easy dispensing of the two components in the correct mixing ratio. It adheres to metal, glass, porcelain, ceramics, wood, marble, stone, concrete, thermosetting plastics, fiberglass, reinforced plastics, hard PVC, rubber, Styrofoam, and more. Not suitable for large glass surfaces, polyethylene, or polypropylene.
Surfaces must be dry and free from dust and grease. Roughen smooth surfaces. Mix one part binder with one part hardener (equal lengths of strands). Apply the adhesive to one side or to both sides for rough materials. Position the parts exactly without applying pressure.
7. UHU Blitzschnell Minis
Extremely strong instant adhesive, portioned in 1 g tubes, in a practical storage box. Optimal quality for any application, 3x seal-fresh. Due to its consistency, the adhesive flows into the smallest corners and gaps. Universally applicable, it bonds porcelain, ceramics, many plastics (e.g., PVC, ABS), metal, rubber, and wood. Not suitable for Styrofoam, clothing textiles/leather, PE, and PP. Bonding surfaces must be precisely fitting, dry, and free from dust and grease. Apply the adhesive thinly on one side. The thinner the adhesive film, the faster the bonding. Press parts together immediately and hold briefly. Breathing on the bond accelerates the curing. After use, wipe the nozzle dry and close tightly. Store tubes in the storage box in a cool place for longer shelf life.
8. UHU Max Repair
UHU Max Repair is an extremely strong and flexible adhesive suitable for almost all bonding applications indoors and outdoors. It bonds porous and non-porous materials. It is water-resistant, gap-filling, and can be painted over once dry. It withstands vibrations and shocks, temperatures ranging from -40°C to +120°C, and UV light, while maintaining elasticity in the bond. The adhesive is transparent, solvent-free, and free of isocyanates.
9. UHU Metal Special adhesive
Due to its gel-like consistency, this adhesive is also excellently suited for bonding to vertical surfaces or for overhead work. It is ideal for use in the home, handicrafts, repairs, and construction. UHU metall has exceptional temperature resistance from -20°C to +125°C and is resistant to moisture, oil, grease, diluted acids, and diluted alkalis. It works well with metal and metal alloys (steel, aluminium), as well as wood, glass, leather, rubber, and many plastics. However, it is not suitable for soft PVC, polyethylene (PE), polypropylene (PP), and polystyrene.
10. UHU Plus Black High viscosity two-component adhesive 45685 50 ml
UHU Plus Black is a two-component epoxy resin adhesive that comes in a dual-chamber cartridge. It includes a dispenser and mixing nozzles that are color-coded for easy identification. This adhesive provides reproducible and consistent bonds without time-consuming preparation. It allows for quick, clean, and precise application and is resistant to many solvents, diluted acids, and alkalis.
The adhesive is thixotropic, has very high strength, and is impact-resistant. It is also aging and temperature-resistant, making it suitable for nearly all solid materials, including composite materials (CFRP and GFRP) as well as many metals. The mixing ratio is 1:1, with a processing time of up to 90 minutes. Hand strength is achieved after about 6 hours, and final strength is reached after approximately 24 hours. The color of the adhesive is black.
Hazard statements:
- May cause allergic skin reactions.
- Causes serious eye irritation.
- Causes skin irritation.
- Toxic to aquatic life with long-lasting effects.
Contains epoxy compounds that may cause allergic reactions.
Danger statements:
- Causes severe skin burns and eye damage.
- May cause allergic skin reactions.
Glue
EUR42,80 EUR856,–/1l
UHU Plus Black High viscosity two-component adhesive 45685 50 ml
53 g, 50 ml
Product order
See all products