Elegant and highly efficient diffuser luminaire suitable for increased requirements. The housing and end caps are made of powder-coated sheet steel, featuring end caps without visible screws and a mould-resistant silicone foam seal. The curved diffuser is made of non-yellowing opal plastic (PMMA). It has a specially matched 2-component optical system for homogeneous and soft illumination of the entire light-emitting surface. This luminaire is suitable for ceiling and wall surface mounting and includes an integrated HF motion detector and light sensor, as well as integrated control gear. It is suitable for through-wiring and offers MultiLumen adjustability of luminous flux in four levels.

Functional parameters of the motion detector allow for ceiling mounting up to 4.0 m or wall mounting up to 2.5 m, with an HF detector operating at 5.8 GHz. The detection angle ranges from 30° to 150°, and the detection area can reach up to 6 m radially, depending on the mounting situation and diffuser/cover. Hold time, daylight threshold, and sensitivity are adjustable via an app. Sensors can be networked via Bluetooth® and can function as a master luminaire with a capacity of up to 400 W (resistive load) or 300 VA (LED). The luminaires have a limited surface temperature in accordance with DIN EN 60598-2-24, making them suitable for environments where non-conductive dust may deposit on the luminaire. They are approved for use in the food and beverage industry and are environmentally friendly and resource-saving due to replaceable components.