Cubic decorative LED ceiling light with IP65 protection rating. End plate made of tempered, satin glass. Suitable for use throughout the building interior. Surface-mounted light for ceiling installation. Fixture secured with an aluminum die-cast mounting plate. Mirror finish made of highly efficient aluminum for light distribution. Features direct beam light intensity distribution. Offers rotationally symmetrical wide beam light intensity distribution. Rated luminous flux 2900 lm, rated power 27.00 W, luminous efficacy of the fixture 107 lm/W. Light color neutral white, color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color point tolerance (initial MacAdam) = 3 SDCM. Average rated lifespan L80(tq 25 °C) = 50,000 h. Fixture body made of aluminum die-cast. Fixture body anodized, primed, and powder-coated. Color anthracite, similar to DB 703. Dimensions (L x W): 150 mm x 150 mm, fixture height 150 mm. Upon request, the fixture body can be produced in the following colors at no additional cost: Textured black, textured white, textured gray. Additional color variants according to RAL or DB color codes are available upon request for an extra charge. Protection class (EN 61140): I, protection rating (DIN EN 60529): IP65, impact resistance rating according to IEC 62262: IK07. Weight: 2.8 kg. Equipped with an electronic control gear, digitally dimmable (DALI). Control gear complies with DALI-2 standard (EN 62386). The control gear is replaceable according to eco-design requirements. The fixture is suitable for operation on a 230V DC power supply. Surge voltage resistance Differential Mode / Common Mode: 4 kV / 2 kV. The product meets the basic requirements of applicable EU directives and the Product Safety Act and bears the CE marking.