LED safety light for illuminating firefighting and first aid facilities as well as hazardous areas with a minimum of 5 Lux vertically according to EN 1838. Suitable for room heights of 4 to 6 m. The High Performance (HP) variant allows for higher mounting heights. Equipped with 2 high power LEDs in neutral white (4,000 K) and a polycarbonate (PC) lens. Optimal thermal management through a cooling plate. Ceiling-mounted light with screw mounting of the device holder and tool-free quick installation of the cover. The cover is made of powder-coated aluminum die-cast, and the housing is white (similar to RAL9016). The device holder is made of galvanized steel sheet. The light has a single battery supply for 1 hour of emergency operation in continuous or standby mode. Automatic testing (Autotest) is performed by the light. Optional central monitoring via DALI. The light status is indicated by a status LED. An NFC interface allows for addressing, configuration, and maintenance via the PROset Pen or PROset App. Addressing can also be done visually or via EZ-addressing as an alternative.

Continuous operation: +5 °C to +25 °C, standby operation: +5 °C to +30 °C. Power supply: 220-240 V AC (+/- 10 %), 50-60 Hz. Light power: 8.2 W (with battery quick charge in continuous operation), typical connection power (without battery charging): 6 W in continuous operation / 1.1 W in standby operation. Standby and continuous operation can be adjusted via jumpers and the NFC interface. Protection class: IP40, SC1. The light is halogen-free and silicone-free wired. Plug terminals for through-wiring up to 2.5 mm². Impact resistance: IK07. Dimensions: 146 x 146 x 48 mm, weight: 0.87 kg. The light has a D mark (for use in an environment where unusual dust accumulation is not expected). Robust, integrated battery with a 3-year warranty. Battery warranty is void if installation occurs more than three months after delivery.