EUR200,95
Hutt C65
Questions about Hutt C65
What would you like to know?
0 questions and answers
The Hutt C65 safety cable is primarily intended as a short fall arrest system for window cleaning on taller buildings. It is normally attached close to the window on the inside and is not designed as a long safety system for large roof areas.
The language setting is not described in the operating instructions. As we are unfortunately unable to offer technical support, I recommend that you contact the manufacturer directly. You can find the contact details under the following link:
https://www.huttwisdom.com/de...
Here’s a general reset procedure based on manufacturer guidance:
1. Power Off the Robot• Press and hold the power button until the device shuts down completely.
2. Disconnect the Power Supply• Unplug the robot from its power source and remove it from the window.
3. Wait for 30 Seconds• Let the robot sit unplugged to allow internal components to discharge.
4. Reconnect and Restart• Plug the robot back in and press the power button to turn it on.
• It should recalibrate and begin its startup sequence.
5. Factory Reset (if available)• Some models may offer a deeper reset via the app or a combination of button presses (e.g., holding both power and spray buttons simultaneously for 5–10 seconds). Check your manual or app settings for this option.
The item 60545779 comes from a third-party retailer who sets its own prices. It is an EU model with a built-in earthing contact plug. An adapter for using the device in Switzerland is included. The scope of delivery of the article 60545779 Hutt C65 includes, according to the information available to us from the third-party supplier: window cleaning robot, remote control, adapter, safety cable, power cable and an empty bottle (1x each). Also included are nozzles (5x) and cloths (10x).
The article 46299656, on the other hand, comes from an exclusive sales partner in Switzerland and is equipped with a Swiss plug. The scope of delivery of the article Hutt C65 includes: Remote control, storage box and four spare wipes.
Helpful answer
I hadn't noticed this during 2 test runs.
But it sprays the windows wet itself anyway, so the microfibre cloths should be dry.
The instructions for use only say water.
Please contact our Galaxus Assistant in this regard so that we can help you individually with your request: https://www.galaxus.de/help
Galaxus
1 year ago
Helpful answer
Ideally, a non-aggressive cleaning agent or washing liquid should be used for cleaning with the window cleaning robot in order to achieve a more intensive cleaning effect. The appliance sprays about 1 ml of water mist every 5 seconds, which can be combined with such a product to remove even stubborn stains. Special aggressive cleaning agents are not required and could damage the appliance or the window surface. High-quality microfibre cloths, which are included in the scope of delivery, support gentle and effective cleaning without streaking.
Automatically generated from the .Galaxus
1 year ago
The window cleaner can basically clean smooth glass surfaces, but it may not work optimally for patio glass roofs with a low incline as it holds on by suction. It is important to check the slope of the glass roof to ensure that the robot does not fall down. A safety cable is provided to prevent falling, but cleaning effectiveness may be compromised.
Automatically generated from the .
Galaxus
1 year ago
The scope of delivery includes the robot itself, a remote control, a safety cable, a power cable with adapter, a water tank, 5 microfibre cloths, 5 nozzles and a manual. The exact number of microfibre cloths can vary depending on the source - some lists state 5, others 10. For precise information on the C65 model, we recommend taking a look at the documentation supplied, as some of the available data refers to similar models such as the C6.
Automatically generated from the .
So far it has worked as it should.
Water is only sprayed in between.
Galaxus
1 year ago
The HUTT C65 window cleaning robot can also be used on sloping surfaces as long as they are safely and effectively accessible. It should therefore be able to clean panes with an inclination of 45 degrees, provided that the surface is stable and safe for the robot.
Automatically generated from the .Galaxus
1 year ago
Helpful answer
The window cleaner may have difficulty cleaning in tight corners as it can easily get stuck. It is advisable to remove larger obstacles before cleaning to ensure optimum performance.
Automatically generated from the .
Galaxus
1 year ago
To find the user manual for Hutt's product "C65 ()", you can visit the manufacturer's official website or check if a direct download link is available. Alternatively, you can search for similar product manuals on Hutt's official website, such as the manual for the W66 window cleaning robot or other models. If you cannot find the specific manual, you may contact Hutt customer service for further assistance.
Automatically generated from the .
19 of 19 questions