Midea Silent Cool 26 Pro WF
31 m², 9000 BTU/h
Questions about Midea Silent Cool 26 Pro WF
What would you like to know?
0 questions and answers
Helpful answer
Yes, a suitable exhaust air hose is included with the system. The hose is designed using "concertina" technology and can be extended to a maximum length of 150 cm.
Helpful answer
The Midea Silent Cool 26 Pro has 2 filters that do not need to be replaced but must be cleaned regularly - the upper filter is on the back directly above the connection for the exhaust air hose, the lower filter is on the side at the bottom right of the device; see operating instructions for a visual representation.
In addition, the water tank should be emptied regularly to prevent mould growth, especially if you use the dehumidifier mode a lot. Before storing the appliance at the end of the season, it is advisable to air it for a while in ventilation mode. All in all, very easy to clean!
Helpful answer
The diameter of the exhaust air hose is 16cm. The supplied reducer has a diameter of 11cm. This will not damage the appliance. Greetings, S.
Helpful answer
Some are supplied, but only for American windows.
You can also order window kits here, they cost around CHF 30/50
Helpful answer
On cooling you don’t have to empty the water tank (there is no water tank actually but there is a hose output and you can use your own bottle or tank, when in dehumidifier mode). On cooling mode it’s using the water collected to cool down the warm condenser which then flows outside through the air hose.
Helpful answer
Only in venting mode, we have never emptied the tank, air conditioning runs every night in summer
Helpful answer
The hose has a diameter of 18cm
I have forwarded our specifications for customisation, they are 78 cm high, 45.5 cm wide and 38 cm deep. The net weight is 31.1 kg.
Helpful answer
These are different suppliers on our part, the articles are otherwise identical.
I wouldn't look so much at the label. The power consumption in cooling mode is 1160 watts. I think that's OK. 10 hours in cooling mode at a price of 25Rp./kWh costs you about Fr. 3.-.
The unit is of very good quality, cools perfectly and is really quiet.
As a rule, a fabric window seal that is attached to the window with Velcro is sufficient, but you must at least tilt a window at another point in the flat because otherwise the air conditioner can create a negative pressure. What hot air is led out must come in again at another point.
Exciting that Galaxus is forwarding this question to buyers of the device :-) Bought on 27.6.2022 for CHF 509 incl. 7.6% VAT. A really good device, but apparently the manufacturer (or others?) wants to rip off +39 per cent from Swiss customers.
Yes, everything is included (even different window adapters).
Helpful answer
A 125 mm hole in the wall is required according to the supplier's instructions, which should correspond to the diameter of the pipe.
I'll say this: Amazon's customer service is not comparable to Digitec. It just depends on the experiences you have had yourself.
20 of 20 questions