EUR136,01
Philips Series 3000 HU3916/10
45 m²
Questions about Philips Series 3000 HU3916/10
What would you like to know?
0 questions and answers
a little difficult to answer the definition of "at the lowest level" is difficult to define for this unit (depending on the fan setting and the desired humidity). the manufacturer's specification is 25W and that is probably meant as the maximum, but i think the consumption is normally a lot lower. i do have a wattmeter, but it is either defective or the device needs so little power that it cannot be measured. in principle, it is also just a fan with a sensor.
5 years ago
Helpful answer
Yes, dieser passt gemäss unseren Infos Philips Filter :-)
No, the device does not have any network features
Amazing! Apparently we have too much confidence in this company. But I was not only annoyed by the abstruse price difference: I have been trying to understand the instructions for use for days.
In night mode, only the moon shines... if that is still too bright, the only thing that helps is to switch it off ;-)
According to the instructions, the filter should be changed every 6 months.
Helpful answer
Yes !
It's been like this at Digitec for a while, so I've already looked around on the net.
The FY3446/30 filter seems to be available from Philips itself - cost 22.00 incl. shipping.
https://www.philips.ch/c-p...
Since there is no delivery date known at Digitec, you can certainly do that :-)
I have been running the unit for over 1 year and have no problems or rattling.
Yes, then the fan turns very quietly and the LED display of the humidity is switched off.
Slanting is a terrific waste of energy. It's also risky, because when the outside wall cools down, mould can form on the inside. So I wouldn't recommend doing anything like tilting windows in winter. By the way, an air purifier can also filter mould spores out of the air. That would also be worth considering.
14 of 14 questions