Roborock S6 MaxV
Robot vacuum
Questions about Roborock S6 MaxV
What would you like to know?
0 questions and answers
Helpful answer
It depends on the length of the hair. We tried the product in my wife's hair salon and it worked great when the staff wiped the salon first. Without wiping, they were able to wrap the long female hair. We have cats at home and it works great, for dog hair I think it depends on the length whether it works or causes problems.
Helpful answer
I also have Yallo and tried everything yesterday and no chance....can this be a Yallo problem?
Our 2.4 GHz WLAN has a different name and we set it up via iPhone. Everything worked great.
Have you ever deleted and re-entered the network options on the Roborock? I know this shouldn't be necessary, but sometimes it does help. Or is your network not recognised at all?
Hello, The delivery of the S7 will begin in the second trimester of 2021 for most of the EU countries. In Europe, the power plug are not the same from a country to another. However I was happily surprised to receive my S6 MaxV with an adapter provided by Galaxus for free! 😁👍
I thought I was the only one this was happening to 😂🙈 so I'm interested in an answer too
Hello As far as I know, the S6 MaxV is currently only available in black. See the official Roborock website.
Helpful answer
There is probably a defect. The WiFi connection with the app was quite simple for me.
According to the manual you should only use water. There are third-party products for robot vacuums, but you'll probably void the warranty.
I prefer to have my Robi clean vinyl floors, but of course tiles also work. We only have tiles in the bathroom area, but there I use harder cleaners and clean manually, i.e. without Robi.
What do you mean by the edge of the sofa? It could be the colour, what colour is the sofa? I have that too and mine always goes under the light beige sofa.
Hi, yes, you can do this, but you don't have to. It also recognises that it is in another map. It could only be difficult if the floors are fairly identical in terms of floor plan. If the next floor is not too big, so that you have to land in between, you don't need to set up a charging station there. It will then finish cleaning where it started. REGARDS
The new S7 MaxV has an improved 3D object detection camera system and can also work with the new vibra-wipe function. In addition, the S7 MaxV could also use an optional suction station / wipe water refill function. However, the surcharge is quite steep for all the optimisations.
So if it's a Roborock S6 MaxV from Digitec itself, which also has the full warranty, then it's new. Sometimes you can get used and tested devices from Digitec, but then they would only have a 12-month warranty.
Helpful answer
The Roborock S6 is definitely the worse model. It only has a small mop water tank that works without an electronic pump and has no 3D no object detection. I think the S6 units are more expensive because they are older. I wouldn't want to swap my S6 MaxV with any of them. The 3D object recognition and the possibility that the hoover can also recognise objects as such was one of the main reasons why I bought the best model from Roborock a year ago. After buying it, it is recommended to update the firmware immediately, because a lot of potential is wasted in the delivery state. The robot has been significantly optimised within a year.
Yes, you can do that with the app, but it only goes around large objects.
if it is to be controlled via app it must be connected, otherwise it probably also works like this
Yes the robot detects chasms such as steps and will automatically turn if one is detected by the down side and down front sensors.
So for a year now, it has been mopping the tiled floors in the kitchen, entrance and bathrooms at least once a week, and the parquet floors in the rest of the flat a little less often. The mop has been in the cupboard unused ever since. But we usually let it do 3 passes, because dried stains are only "moistened" in the first pass, but only really go away in pass 2 or 3. Of course, there are always stains that don't go away even then. But for those, even if you use a mop, you would put it aside and work on them quickly with a cloth.
We never had issues with the water. Holes are not that small. Worst case have it passing a brita filter.
Is the latest firmware already installed? I have the same Roborock S6 MaxV and I can use the dust bin for a long time without emptying it. The latest firmware is July 2021 version 01.58.50.
30 of 67 questions