The robot is 7.98 cm high. The dustbin empties automatically into the base station. The detergent is filled via a tank built into the station, without the need to open a top lever. This compact height means it can be slid under a washbasin drawer if there is more than 8 cm of free space.

Unfortunately, there is currently no exact information available on the dimensions of the fresh water and waste water hoses of the Roborock Saros 10 with water connection.

Except for what is needed for the power cable plug (approx. 3cm at the back), a few cm to the side or top for the hoses depending on the installation radius, only to the front for moving in and out approx. 80cm-1m

The instructions state that the connection can withstand a maximum of 4 bar. It is therefore advisable to use a pressure reducing valve if the water pressure is higher to prevent damage.

You can find it here https://www.galaxus.ch/de/s2/product/roborock-saros-10r-saugroboter-staubsauger-roboter-57948266.

This is possible, see instruction 043 under the following conditions: https://support.roborock.com/hc/de/article_attachments/44330932061465