Best selling Weather station accessories from Schneider
On this page you’ll find a ranking of the best Weather station accessories from Schneider. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Schneider MTN663592
Wind sensor with 0-10 V interface and heating. The wind sensor measures wind speed and converts it into an analog 0-10 V output voltage. The integrated heating can be powered by an external AC 24 V/500 mA supply to ensure trouble-free operation in freezing weather. Designed for external mounting and connection to the weather station REG-K/4fold or the analog input REG-K/4fold. These two devices provide the necessary supply voltage for the operation of the sensor. Measurement range: 0.7-40 m/s, linear. Output: 0-10 V. External power supply: Voltage: 24 V DC (18-32 V DC). Current consumption: approx. 12 mA. Heating: 24 V DC/AC PTC element (80° C). Protection class: IP 65. Load: max. 60 m/s transient. Cable length: 3 m, LiYY 6 x 0.25 mm². Mounting type: mounting bracket. Installation position: vertical. Contents: with mounting bracket. Color: polar white.
2. Schneider MTN682991
Schneider Electric KNX. The weather station captures and processes analog sensor signals such as wind speed, brightness, twilight, precipitation, and a DCF77 signal. Up to four freely combinable analog sensors and the weather combination sensor/DCF77 can be connected. In conjunction with the 4-channel analog input module, 8 analog inputs are available, with the connection made via the sub-bus. When using the weather combination sensor/DCF77, a preset can be accessed in the software. The measured values are converted by the weather station into 1-Byte/2-Byte telegrams (EIS 6/5 Value). This allows corresponding bus participants (visualization software, measurement displays) to intervene in control processes, generate messages, or manage weather-dependent processes. Programming is done via the ETS tool for weather stations. Designed for mounting on TH35 DIN rails according to EN 60715. The bus connection is made via a bus connection terminal, and a data rail is not required. Comes with bus connection terminal and cable cover. Color: light gray.
3. Schneider MTN663594
Twilight sensor. The twilight sensor is used to detect and evaluate brightness. Brightness is captured via a photoelectric diode and electronically converted into an analog output signal ranging from 0 V to 10 V. It is designed for external mounting and connection to the weather station REG-K/4fold or the analog input REG-K/4fold. These two devices provide the necessary supply voltage for the operation of the sensor. Measurement range: 0 to 255 Lux, linear. Output: 0-10 V short-circuit proof. External power supply: Voltage: 24 V DC (15-30 V DC). Current consumption: approximately 5 mA. Connection: with PG7 fitting. Recommended cable: 3 x 0.25 mm². Protection class: IP 65. Dimensions: 58 x 35 x 64 (W x H x D). Color: light gray.
4. Schneider MTN6604-0001
The weather combination sensor includes a wind sensor, rainfall sensor, twilight sensor, and three brightness sensors (East, South, West), as well as an integrated heater to protect against dew and condensation. The sensor is suitable for outdoor mounting on a wall or mast and connects to a REG-K weather station with four connections. The evaluation of the weather data takes place in the weather station. The necessary power supply is provided through the weather station with the connected REG power supply.
Power supply: AC 24 V (+/- 15%). Current consumption: max. 600 mA (with heating). Sensors: 6. Wind speed: 1-40 m/s (equivalent to 0.5 m/s). Brightness: 0-110 klux (+/- 10%). Twilight: 0-250 Lux. Protection class: IP 65 in the installed state. Temperature range: -40 °C to +60 °C (non-icing). Mounting type: mounting bracket. Dimensions: 130 x 200 mm (diameter x height). Color: black.
5. Schneider MTN663596
Temperature sensor. The temperature is measured with the temperature sensor and converted into an analogue output signal of 0-10 V. It is designed for external installation and connection to the REG-K/4gang weather station or the REG-K/4gang analogue input. These devices provide the supply voltage required to operate the sensor. Measuring range: -30° C to +70° C linear. Output: 0-10 V short-circuit proof. External power supply: Voltage: 24 V DC (15-30 V DC). Current consumption: approximately 3 mA. General specifications: Incoming cable with PG7 cable gland. Recommended cable: 3 x 0.25 mm². Protection class: IP 65. Dimensions: 58 x 35 x 64 (W x H x D). Colour: light grey.
Product order
See all products