Best selling Weather station accessories
Here’s a ranking of the best selling Weather station accessories. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
1. somfy Eolis io
The sensor enables automatic control of one or more io drives or io receivers via radio, depending on wind and rain conditions. When the set threshold for wind is exceeded, the fabric is raised or retracted for protection. After approximately 30 seconds or 12 minutes, further manual or automatic commands are released. Integrated rain automation in conjunction with the Ondeis 230V rain sensor (not included). Wind threshold values are adjustable in 6 levels from 28 km/h to 88 km/h. The behavior of the integrated rain automation can be adjusted via a switch - the wind automation brings the io-motorized applications to a safety position in strong winds. Operating voltage: 230 V - 50 Hz. Operating temperature: -20 to 50 degrees Celsius. Protection class: IP 34. Protection category: II. Radio frequency: 868-870 MHz. Wind adjustment range: 28-88 km/h, no cable is included in the delivery.
2. somfy Eolis WireFree io
Wind automation: The Eolis WireFree io continuously measures the current wind speed. If the set threshold for wind is exceeded, the awning or blind will be lowered or raised for protection. If the set threshold is not met, an additionally installed sun automation will be reactivated after 12 minutes.
3. Technoline Tx 35-It
Is your station not receiving outdoor temperature readings despite following the battery replacement instructions and/or performing a reset? Then your outdoor sensor may be defective. But no worries, you can now replace the outdoor sensor without necessarily having to invest in a new station. A proper smart home includes measuring temperature and humidity in every room. However, this can quickly drive up hardware costs. To build a JeeLink yourself, you will need an Arduino Nano and an RFM12B for 433/868 MHz. The TX 35-IT sensor is a significantly cheaper alternative. It is only recommended for true DIY enthusiasts and tech lovers.
4. TFA ID-A5
The TFA Dostmann ID-A5 Thermosensor is a versatile device for precise temperature monitoring both indoors and outdoors. It allows for connection with a waterproof cable sensor, which is available as an option, making it ideal for monitoring refrigerators, aquariums, or terrariums. The device is compatible with the TFA.me system and can be used with various TFA radio stations that support ID radio technology. The simple display ensures user-friendly operation and allows for quick reading of temperature values. The thermosensor is battery-operated and offers a maximum range of up to 100 meters, making it a practical solution for various applications.
- Compatible with TFA.me system and TFA radio stations
- Battery-operated with a range of up to 100 meters
- Connection for optional waterproof cable sensor for extended temperature monitoring
- Simple display for user-friendly operation.
5. TFA 30.3147.It
The T transmitter from TFA Dostmann is a highly advanced thermal sensor designed for precise measurement of outdoor temperatures. With a measurement range of -40 °C to +60 °C, it provides reliable temperature monitoring for various outdoor applications. The sensor is splash-proof, making it ideal for use in different weather conditions. The wireless transmission operates at a frequency of 868 MHz, allowing a range of up to 100 meters in open fields. Its compact and robust plastic housing ensures durability and ease of handling, as the sensor is suitable for both hanging and standing. The required batteries are included, simplifying the setup process. The T transmitter is compatible with a variety of weather stations, making it a versatile addition to your home or office.
- Splash-proof for outdoor use
- Wireless transmission at a frequency of 868 MHz
- Maximum measurement range of -40 °C to +60 °C
- Range of up to 100 meters in open fields
- Easy installation with hanging or standing options.
6. Netatmo Nim01-Ww
Do you want to measure the air quality in your bedroom or bathroom as well? That's a great idea. Every room is different and requires special attention. The smart weather station from Netatmo can monitor up to three additional rooms with extra smart indoor modules. Temperature, humidity, and air quality (CO2): Access the values for each room in real-time via your smartphone. The indoor additional module is sold separately and only works with a Netatmo smart weather station, which is available for purchase separately.
7. Davis Solar Sensor Instruments DAV-64
For measuring solar radiation and solar energy. The diffuser element and housing have been carefully designed for very low cosine deviation. Silicon photodiodes provide a good match to the solar spectrum. A double-walled housing minimizes radiative heat, allows for convective cooling of the sensor, and prevents the accumulation of water or dust. For installation next to the rain gauge, additionally mount the sensor holder (not included).
8. somfy Sunteis Solar io
The Somfy Sunteis Solar io is an innovative, solar-powered radio sensor that accurately measures both brightness and outdoor temperature. This weather station accessory is easy to install and requires no maintenance, making it a practical solution for enhancing temperature comfort and energy efficiency in living spaces. The sensor sends control commands to radio drives when the set thresholds for brightness or temperature are exceeded. This can occur either directly or via a bidirectional control system like TaHoma. An intelligent algorithm ensures that the temperature measurement in sunlight is compensated, making it similar to the temperature measured in the shade. The discreet design with a concealed solar panel allows for unobtrusive installation, while the wireless mounting offers flexibility. The sensor comes pre-charged and is ready for immediate use, further simplifying installation.
- Solar-powered radio sensor for brightness and temperature
- Easy installation with no maintenance required
- Intelligent temperature compensation for accurate measurements
- Discreet design with a concealed solar panel.
9. Netatmo Smart anemometer
The wind meter measures wind direction and speed. It works with ultrasound, a state-of-the-art technology for extremely precise measurements. You can set parameters for messages. For example, you will be notified when the wind reaches a certain speed. With the wind gauge you can determine the best time for activities such as sailing, cycling or golf. The anemometer only works with the separately available Netatmo weather station. You can only connect one anemometer to each Netatmo weather station.
10. TFA 30.3155.Wd
Outdoor sensor for temperature and humidity 30.3155.WD. Replacement transmitter for Wetterdirekt devices with thermometer-hygrometer display, for example, for Astra Plus, Galileo Plus, Eos Info, Genio 300 Plus, Sirius 300 Plus, WD 1800, Stella Info, WD 4204. The transmitter can only be used as a replacement, as only one transmitter can be connected to each of the mentioned devices. The transmitter is not compatible with other devices operating at 868 MHz.
Measuring range: -40 to +60 degrees, 0 - 99 % rH, 868 MHz, IT radio, range up to 100 meters. Dimensions 127 x 38 mm. Mounting materials and batteries included.
Product order
See all products