With integrated door handle control. The locks of the EL 460 model series feature a split handle rose and therefore require an inside handle (or panic bar) and an outside handle. The lock is activated by a signal from a card reader, code lock, timer, button, etc. The bolt is retracted by the coupled outside handle, releasing the locking of the deadbolt. When closing the door, the control bolt interacts with the deadbolt to exclude the preloaded bolt and lock the deadbolt, thus serving as an additional locking mechanism. The adjustment of the panic side and the selection between power and standby mode can be done at the lock if necessary. The operating nominal voltage is 12 - 24 V DC.

Working current version: As long as power is supplied, the lock can also be opened via the outside handle. However, when power is turned off (or in case of a power outage), the outside handle is inoperative.

Standby current version: As long as no power is supplied (or in case of a power outage), the lock can also be opened via the outside handle. However, when power is supplied, the outside handle is inoperative.

Features:

• Self-locking with deadbolt and latch
• Mechanical control between deadbolt and control bolt
• Integrated panic function via the inside handle
• Override function for unlocking with a key from the outside
• Approval according to DIN EN 179 and DIN EN 1125
• Suitable for installation in fire doors
• Low backset: 15 mm

Technical data:

• Operating nominal voltage 12 V to 24 V DC stabilized (-10% / +15%), at 12 V DC 480 mA inrush current for 1 sec., in operation 12 V DC 240 mA, at 24 V DC 270 mA inrush current for 1 sec., in operation 24 V DC 110 mA
• Load capacity of microswitch 24 V DC: 200 mA
• Operating temperature -20 °C to +60 °C
• Backset for tubular frame version 30, 35, 40, 45 mm
• Bolt throw 20 mm

Approvals:

• DIN EN 179 EU conformity certificate: 0432-CPR-00008-01
• DIN EN 1125 EU conformity certificate: 0432...