Devi heating mat for asphalt installation DEVIasphalt 300#0614. Manufacturer: Devi. Designation: Heating mat for asphalt installation 6.0 sqm, 1740W. Type: DEVIasphalt 300#0614. With carrier mat: Yes. Fixation of heating conductor: Glued. Self-adhesive: No. Connected load: 1740 W. Output: 300 W/m². Heating conductor load: 30 W/m. Number of cold conductors: 1. Length of cold conductors: 30000 mm. Suitable for damp rooms: Yes. Suitable as open area heating: Yes. Suitable as roof area heating: No. Area: 6 m². Length: 6000 mm. Width: 1000 mm. Thickness: 8 mm. With controller: No. With room thermostat: No. With floor temperature sensor: No.

Ready-to-install heating mat with a connection cable, suitable for embedding in asphalt pavements. The heating cable fulfills the requirements of IEC 60800 and EN 62395. It includes additional protective braiding for use with the residual current circuit breaker, a factory-fitted watertight sleeve, and a 30 m long PTC resistor. Voltage: 400 V, nominal limit temperature: 90°C, installation temperature: 240°C for short periods, deformation resistance: 2000 N, tensile strength: 120 N, heating conductor insulation: FEP, PTC resistor: 1 x 30 m 2.5 mm², specific heat output: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 5 x dA, protection class: IP X7, surface: 6.0 m², dimensions: 1.00 x 6.00 m, power: 1770 W.