Etherma Outdoor Heating 253-GUSN-75-430

Manufacturer: Etherma
Description: Outdoor heating 3.23 sqm 806 W 400 V
Type: 253-GUSN-75-430
Design: other
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: no
Connection voltage: 400 V
Connection power: 806 W
Power: 250 W/m²
Heating conductor load: 25 W/m
Resistance: 199 Ohm
Number of cold leads: 1
Length of cold leads: 10,000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 3.23 m²
Length: 4,300 mm
Width: 750 mm
Thickness: 7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The outdoor heating system for installation in cast asphalt GSN is designed to keep parking garage entrance ramps, emergency access routes, entrance areas, etc., free from snow and ice. The GSN heating mat consists of a glass fiber mesh onto which a dipole heating conductor is sewn. The permitted application temperature is 240 °C for 10 minutes. The glass fiber mesh prevents the heating conductor from floating up. The sewing technology with an aramid thread ensures 100% reliable installation and stability of the heating mat. The mat does not need to be fixed to the substrate. The optimal asphalt thickness is 2x2 cm and must be applied in two working steps. The heating conductor is resistant to spherical acids and alkalis.

Tip: We produce your connection cable to measure.
Nominal temperature: 105 °C
System structure: according to EN60335
Certification mark for heating conductor: FIMKO, CE compliant
Protection class: IP X7
Outer diameter: 7 mm
Connection cable: 10 m, 3x1.5(2.5) mm²
Min. bending radius: 5 d
Min. installation temperature: -5 °C
Outer sheath temperature resistant: 240 °C/35 min
Protection measure: RCD protection circuit 30 mA
EAN: 9120061398753.