Etherma Outdoor Heating 303-BRUS-75-680

Manufacturer: Etherma
Description: Outdoor heating 5.11 sqm 1534 W 400 V
Type: 303-BRUS-75-680
Design: other
With carrier mat: no
Fixation of heating conductor: glued
Self-adhesive: no
Connection voltage: 400 V
Connection power: 1534 W
Power: 300 W/m²
Heating conductor load: 30 W/m
Resistance: 104 Ohm
Number of cold conductors: 1
Length of cold conductor: 10000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 5.11 m²
Length: 6800 mm
Width: 750 mm
Thickness: 7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The BRS heating mat is designed to keep parking garage ramps, emergency access routes, and entrance areas free from snow and ice. The heating mat is ideal for installation in concrete screed, flow concrete, monolithic concrete, site concrete, and even in 3 cm protective concrete, as well as for installation in rolled asphalt. Due to its robust, impact-resistant design, the BRS heating mats can be used in areas with increased mechanical stress. The heating conductor is resistant to spherical acids and alkalis. The special processing and only one connection line simplify the installation of the heating mats.

Tip: We are happy to produce your connection line to measure.
Nominal temperature: up to 105 °C
System construction: according to EN60335, CE compliant
Protection class: IP X7
Outer diameter: 7 mm
Connection line: 10 m, 3x1.5 (2.5) mm²
Min. bending radius: 5 d
Min. installation temperature: -5 °C
Temperature resistance of the heating conductor: 180 °C/45 min
Protective measure: RCD protection circuit 30 mA
EAN: 9120061398500.