Etherma Outdoor Heating 303-BRUS-95-450

Manufacturer: Etherma
Designation: Outdoor heating 4.29 sqm 1287 W 400 V
Type: 303-BRUS-95-450
Version: other
With carrier mat: no
Fixation of heating conductor: glued
Self-adhesive: no
Connection voltage: 400 V
Connection power: 1287 W
Power: 300 W/m²
Heating conductor load: 30 W/m
Resistance: 124 Ohm
Number of cold conductors: 1
Length of cold conductor: 10,000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 4.29 m²
Length: 4500 mm
Width: 950 mm
Thickness: 7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The BRS heating mat is designed to keep parking garage ramps, emergency access routes, and entrance areas free of snow and ice. The heating mat is ideal for installation in concrete screed, flowing concrete, monolithic concrete, site-mixed concrete, and even in 3 cm protective concrete, as well as for installation in rolled asphalt. Due to its robust, impact-resistant design, the BRS heating mats can be used in areas with increased mechanical stress. The heating conductor is resistant to spherical acids and alkalis. The special processing and only one connection line simplify the installation of the heating mats.

Tip: We are happy to produce your connection line to measure.
Nominal temperature: up to 105 °C
System construction: according to EN60335, CE compliant
Protection class: IP X7
Outer diameter: 7 mm
Connection line: 10 m, 3x1.5 (2.5) mm²
Min. bending radius: 5 d
Min. installation temperature: -5 °C
Temperature resistance of the heating conductor: 180 °C/45 min
Protection measure: RCD protection circuit 30 mA
EAN: 9120061398586.