Flexible current sensor 3/30/300 A, 1000-10 mV/A, sensor length 160 mm. With the micro-Rogowski current sensor, you can measure safely, precisely, and flexibly on busbars as well as in power distribution. The coil is particularly well-suited for hard-to-reach and tight spaces. The current sensor can be powered by an external power supply for long-term measurements. It has a wide range of applications, with 3 measurement ranges of 3/30/300 A AC and a high bandwidth of 20 Hz to 100 kHz (±1 dB / 50 Hz) for harmonic analysis. Accurate measurements are possible even at low currents due to a large dynamic range and high sensor sensitivity. Minimal influence from the conductor's position and minimal interference from external fields. Easy to use in confined spaces thanks to a small sensor cross-section of 6 mm. Safe handling even with protective gloves, with one-handed operation for opening the sensor and setting the measurement range. Current sensor with protection class IP50, measuring amplifier with IP40. High safety for the user, measurement category 1000 V @CAT III, 600 V @CAT IV, and unlimited overload capacity, designed for continuous operation. Measurement ranges 3 A / 30 A / 300 A, scaling factor 1 / 10 / 100, output sensitivity 1000 mV/A / 100 mV/A / 10 mV/A. Accuracy (45 ... 65 Hz) under reference conditions ±1 % of the measured value ±0.2 A / ±1 % of the measured value ±1 A. Noise 3 mV eff. / 1 mV eff. / 0.1 mV eff. Output connection 1 pair of 4 mm safety plugs.