Branch T-piece with flanged, round, and unperforated side rails, featuring connector holes for connections and an integrated joint connector, designed for wide-span cable ladders. It is shape-stable due to a rear-mounted support profile and riveted, upward-opening C-profile rungs with a slot width of 16 mm. Ideal for cost-effective production of 90° T-branches and intersections, depending on width in the main direction, including galvanized fastening accessories. The radii of the fittings are designed to allow cable installation according to DIN/VDE 0298 Part 3. Suitable clamp brackets can be found in the KI catalog. Joints must be supported by an appropriate load-bearing structure in close proximity. Usable for wide-span cable ladders WSL 105. Dimensions (approx. measurements) Height H (clear internal dimension) x Width B (clear internal dimension): 106.5 x 505 mm. Notch of the wide-span cable tray: 1003 mm + B. Length in the branch direction: 750 mm. Internal rail radius R: 500 mm. Material: Steel, strip galvanized according to DIN EN 10346.