Aluminium oxide A - Cylindrical shape - Abrasive belts are used in series production, for finishing and in assembly - Tear-resistant, fully synthetic resin-bonded material forms the basis - The good grain adhesion ensures a long service life - The addition of grease or abrasive oil is recommended, especially for light metal machining. Recommended peripheral speed Vc = approx. 20 - 30 m/sec.

Further technical features:

• Type of drive: flexible shaft drive, straight grinder
• Recommendation for use: For easy changing of the abrasive sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve holder. Use grinding oil suitable for the material to significantly increase tool life and grinding performance. For best performance, use at a recommended cutting speed of 20-30 m/s.
• Machinable materials: Aluminium, grey/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² (54 HRC)
• Machining tasks: Welding seam processing, levelling, edge processing, sharpening, roughening, stepwise fine grinding, deburring, surface processing
• Ordering information: Please order abrasive sleeve carrier separately
• Ø Inside: 15mm
• RPM, opt., up to: 36,000 RPM
• RPM, opt., from: 26,000 RPM
• Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder
• Advantages: Secure seating of the abrasive sleeve on the abrasive sleeve holder due to expansion of the holder during use. Highly economical due to particularly high material removal and high abrasive aggressiveness. Outstanding service life due to special manufacturing process - even under the toughest operating conditions.

Contents: 100 pieces per carton.