Grinding sleeve D15xB30mm K.50 Corundum A max. speed 36000 min⁻¹ PFERD: Corundum A for universal use from coarse to fine grinding. Delivered without rubber holder.

Additional technical specifications:

• Drive type: Straight grinder, flexible shaft drive
• Application recommendation: For easy changing of grinding sleeves, pull them on and off with a slight right twist. Keep the grinding sleeve holder clamped in the tool drive. Use suitable grinding oil for the material to significantly increase the tool's service life and grinding performance. For best performance, use at a recommended cutting speed of 20-30 m/s. To ensure a secure fit of the grinding sleeve, adhere to the minimum speed of the grinding sleeve holder.

Processable materials: Bronze, cast steel, cobalt-based alloys, aluminum, ductile cast iron, thermoplastics, brass, copper, fiber-reinforced thermosets (GRP, CFRP), gray/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² (54 HRC), steels up to 1,200 N/mm² (< 38 HRC).

Processing tasks: Welding seam processing, roughening, sharpening, edge processing, leveling, stepwise fine grinding, deburring, surface processing.

Ordering notes: Please order the grinding sleeve holder separately.

Ø Inside: 15mm
RPM, opt., up to: 36000 RPM
RPM, opt., from: 26000 RPM

Safety notes: The maximum permissible peripheral speed is 30 m/s. The specified maximum permissible speed must never be exceeded for safety reasons. Do not allow grinding sleeves to protrude beyond the grinding sleeve holder.

Advantages: Secure fit of the grinding sleeve on the grinding sleeve holder due to the expansion of the holder during use. Outstanding service life due to a special manufacturing process – even under the toughest operating conditions. Highest cost-effectiveness due to particularly high material removal and high aggressiveness of the abrasive.