Corundum A - For universal use from coarse to fine grinding. Delivery without rubber buffer.

Further technical information:

• Drive type: Straight grinder, flexible shaft drive
• Application recommendation: For easy changing of grinding sleeves, pull them on and off with a slight right twist. Keep the grinding sleeve holder clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. To ensure a secure fit of the grinding sleeve, adhere to the minimum speed of the grinding sleeve holder. Use suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools.

• Processable materials: Aluminum, brass, ductile cast iron, bronze, steel castings, thermoplastics, cobalt-based alloys, copper, stainless steel (INOX), fiber-reinforced thermosets (GRP, CFRP), hardened, tempered steels over 1,200 N/mm² (54 HRC), steels up to 1,200 N/mm² (< 38 HRC), gray/spheroidal cast iron (GG/GJL, GGG/GJS)
• Processing tasks: Leveling, deburring, stepwise fine grinding, roughening, sharpening, surface processing, edge processing, weld seam processing

• Ordering notes: Please order grinding sleeve holders separately.
• Ø Inner: 30 mm
• RPM, optimal, up to: 19,100 RPM
• RPM, optimal, from: 13,000 RPM

• Safety notes: The maximum permissible circumferential speed is 30 m/s. The specified maximum permissible speed must never be exceeded for safety reasons. Do not allow grinding sleeves to protrude beyond the grinding sleeve holder.

• Advantages: Secure fit of the grinding sleeve on the grinding sleeve holder due to the expansion of the holder during use. Highest efficiency due to particularly high material removal and high aggressiveness of the abrasive. Outstanding service life due to a special manufacturing process - even under the toughest operating conditions.

Content quantity: 100 pieces per cardboard box.