Designed to accommodate high tensile loads with additional load support in horizontal directions. Depending on the load, it is possible to install 2 or 4 rafter anchors per connection. The position of the connectors is variable, as there is a double-row hole pattern on each leg. The SPF rafter anchors are used for the tensile anchoring of intersecting timbers. They can also absorb horizontal forces. Depending on the load, 2 or 4 rafter anchors are used per joint. When using 2 anchors per joint, 2 left or 2 right connectors are required, as they should be arranged diagonally opposite to ensure central load introduction. Transverse tensile stress on the timbers must be considered and, if necessary, demonstrated.