The UNI-T UT195E multimeter is a versatile tool for measuring essential electrical quantities such as DC or AC voltage, DC or AC current and resistance. It can also check circuit continuity, test diodes and measure capacitance, frequency and duty cycle. The meter supports both manual and automatic range selection as well as relative and true RMS measurements. It has functions for recording measured values and freezing the last display. DC voltage: 600 mV / 6 V / 60 V / 600 V / 1000 V ± (0.5 % + 3). AC voltage: 600 mV / 6 V / 60 V / 600 V / 750 V / LoZ 600 V ± (0.7 % + 3). Direct current: 600 µA / 6000 µA / 60 mA / 600 mA / 6 A / 20 A ± (0.8 % + 3). Alternating current: 600 µA / 6000 µA / 60 mA / 600 mA / 6 A / 20 A ± (1 % + 3). Resistance: 600 Ohm / 6 kOhm / 60 kOhm / 600 kOhm / 6 MOhm / 60 MOhm ± (0.8 % + 2). Capacitance: 6 nF / 60 nF ~ 600 µF / 6 mF ~ 60 mF; ± (3 % + 5). Frequency: 60 Hz ~ 10 MHz ± (0.1 % + 4). Duty cycle: 0.1-99.9 %. Diode test. Continuity test. Power supply: 9 V battery (6F22 / 6LR61). Screen size: 66 x 51 mm. Number of measurements: 3/s. Dimensions: 206.5 x 95.5 x 61 mm. Weight: 450 g. Scope of delivery: Battery, test cable, housing. Additional functions: Automatic/manual change of measuring ranges. AC voltage measurement for sources with low internal resistance. True RMS. Relative measurement mode. MAX/MIN value recording. Automatic switch-off. Low battery indicator. Freezing of the last measured value. Analogue column: 31 segments (number of measurements: 10/s). Automatic LCD backlight. Torch. Maximum display: 6000.