Best Proxxon products in the Multi-purpose power tools category
On this page you'll find a ranking of the best Proxxon products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Proxxon Industrial drill grinder IBS/E
For drilling, milling, grinding, polishing, cleaning, cutting, engraving, and signing. Suitable for precision mechanics, model builders, jewelry workshops, opticians, craftsmen, and electronics technicians. Features high concentricity without vibrations or chattering of the tools. Equipped with a high-speed motor and a balanced DC special motor. Offers stepless electronic speed control with full-wave electronics. Includes a precision shaft with ball bearings made of hardened steel and six triple-slit micromot steel collets. The robust die-cast aluminum gear head has a micromot system adjustment for use in drilling and horizontal stands. The main housing is made of fiberglass-reinforced polyamide and comes in a plastic case with 34 accessories.
2. Proxxon Micromot 60/EF
Micromot 60/EF with power pack and 43 industrial-quality insert tools. With quick-action chuck. Practical for employees with different shank diameters. 43 insert tools in industrial quality are included: 10 HSS twist drills similar to DIN 338. Ø 0.3 - 0.5 - 0.8 - 1 - 1.2 - 1.5 - 2 - 2.5 - 3 - 3.2 mm, 1 cylindrical grinding pin Ø 5 mm, 1 cylindrical grinding pin Ø 6 mm, 5 grinding wheels Ø 10 mm, 1 carrier for grinding wheels, shaft diameter Ø 3.2 mm, 1 sanding disc Ø 22 mm (pink) made of aluminium oxide, 1 sanding disc Ø 22 mm (grey) made of silicon carbide, 1 polishing disc for acrylic and Plexiglas, 1 brass brush, 20 aluminium oxide cutting discs, 1 tool holder.
3. Proxxon Handpiece MHX/E
Replacement unit without accessories. DC voltage motor. Quiet and smooth when working, handy. With streamlined design for comfortable. Works in 2 gripping positions: Finger and whole hand. Excellent ball bearing spindle. To change the tips, just lock them with the button. 150 cm coiled cable with reverse polarity plug. Connection via low voltage power supply (12-18V): as power source we recommend control unit SGX. Safe wet operation possible. Diameter 35mm.
4. Proxxon Battery multifunction tool
Micromot IBS/A 29800 cordless multifunction tool including accessories and a 37-piece case, 10.8 V 2.6 Ah. Suitable for drilling, routing, grinding, polishing, cleaning, cutting, engraving, and marking. This high-speed tool features infinitely variable electronic speed control for high torque in the lower speed range. It has a double ball-bearing precision shaft made of polished steel and six triple-slotted Micromot steel collets for high concentricity. Includes a 20 mm holder for use on drilling or horizontal stands. Utilizes lithium-ion technology with gear heads made of die-cast aluminum and a housing made of glass fiber reinforced polyamide. The handle area features a soft component for comfort. Equipped with a special DC motor. The scope of delivery includes 34 insert tools, a Li-ion battery (10.8 V/2.6 Ah), an LG/A quick charger, and a hard case.
5. Proxxon Long-neck drill grinder LBS/E
With a housing head made of aluminum die-cast and a 100 mm long, slim spindle neck (Ø 20 mm). Designed for working in areas that are almost unreachable for conventional rotary tools: milling, grinding, polishing, drilling, deburring, and finishing (especially suitable for internal grinding). A high-speed tool with a balanced special motor. Infinitely variable electronic speed control (full-wave electronics). Ball-bearing precision shaft made of ground steel. Six 3-slot MICROMOT system collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm) ensure high run-out accuracy. No rattling or chattering of the tool attachments. The spindle locking mechanism facilitates tool changes. The 20 mm spindle neck (MICROMOT system fitting) also makes it suitable for use with drill and horizontal stands.
6. Proxxon Drilling and milling machine Micromot 230E
For drilling, milling, grinding, polishing, brushing, cutting, and engraving. The extremely slim housing, made of fiberglass-reinforced polyamide, features soft components in the grip area, allowing the device to be guided with two fingers in a pen grip. It has a balanced DC special motor that is quiet and extremely durable. The maximum speed can be continuously reduced by full wave electronics, maintaining almost the same torque in the lower speed range, which is particularly important for fine boring, brushing, and polishing. The ground, ball bearing spindle and high-quality micromot steel collets ensure that even the smallest shafts are clamped absolutely centrically, eliminating chattering and beating of the deployment tools. The spindle for tool change can be locked at the push of a button, and the system is compatible for use in micromot drilling rigs and horizontal rigs.
7. Proxxon Fine boring grinder FBS12/EF
For fine boring, milling, grinding, polishing, brushing, derusting, engraving, chasing and cutting With drill chuck (clamping range 0.3 - 3.2 mm). Ball-bearing precision spindle made of ground steel, which can be locked for tool change at the push of a button. Spindle head turned out: MICROMOT steel collets can be used. Balanced DC special motor, powerful, quiet and durable. Stepless speed control with feedback effect (high pulling power in the lower speed range). Housing made of glass fibre reinforced POLYAMIDE.
8. Proxxon Micromot 50 E/F
Drilling and milling machine. With a diameter of only 35 mm unsurpassed handy. In addition, the low weight (approx. 230 g), a pleasant singing noise and free running due to balanced motor with ground, ball bearing mounted spindle. Quick-action chuck and electronic speed control with feedback effect (high pulling power in the lower speed range). Balanced DC special motor, powerful, quiet and durable. A power supply unit with a minimum output of 1.0 A is required for operation. Technical data: DC voltage 12 - 18 V. Power consumption up to 40 W. 5.000 - 20.000/min. Length 220 mm. Weight 230 g.
9. Proxxon Micromot 230/E
Micromot 230/E drilling and milling unit in a case. With a diameter of just 37 mm and a weight of only 270 g, it is extremely slim and lightweight. It features a soft component in the grip area and a balanced special motor that is quiet and durable. The speed control ranges from 6,000 to 22,000 RPM. The spindle is ground and ball-bearing mounted. High-quality Micromot steel collets ensure that even the smallest shafts are clamped absolutely concentrically, preventing chattering and knocking of the tools. The spindle can be locked at the push of a button for tool changes. It has a 20 mm system connection for use in Micromot drill stands and horizontal stands. The unit comes complete with 34 industrial-quality tools and 6 collets (1 each of 1, 1.5, 2, 2.4, 3, and 3.2 mm). Everything is securely stored in a stylish, super-stable plastic case.
10. Proxxon Motor carver MSG
Gypsum can also be processed. It features a balanced DC special motor that is quiet and extremely durable. The gearhead is made of die-cast aluminum, and the main housing is constructed from glass-fiber reinforced polyamide. Three high-quality Japanese bi-metal knife inserts (U-shape, V-shape, and flat knife) are included.
