Multimeter
EUR652,70
Metrix Bench multimeter For your laboratory applications simple and efficient
CAT III 1000V
Best selling Multimeters from Metrix
On this page you'll find a ranking of the best Metrix products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Metrix Bench multimeter For your laboratory applications simple and efficient
The multimeters have all the measurement functions necessary in electronics: DC currents, resistances, frequencies, voltage peak values, RMS values, and more. With a bandwidth of 100 kHz, the smallest measuring range of 60 mV, and a resolution down to µV on the MX 5060, the multimeters offer high measurement accuracy in all types of measurements, comparable to portable VDC multimeters with 0.05% accuracy. The large measuring ranges and numerous combination possibilities make the instruments extremely versatile and suitable for various applications in electrical engineering and on speed controllers.
2. Metrix Current clamp MX 355
The compact and ergonomic model MX 355 is specially designed for applications on smaller electrical installations with currents up to 400 A, such as apartments, small craft, or commercial enterprises. With the MX 355, DC currents can also be measured with automatic zero balancing, allowing for differential measurements of currents, voltages, and resistances.
3. Metrix MTX 3297Ex Hand-held multimeter digital Ex-protected CAT III 1000 V, CAT IV 6
The MTX 3297Ex is a digital multimeter that complies with the current European ATEX directive 2014/34/EU. It meets the requirements for use in industries such as oil, chemicals, pharmaceuticals, cosmetics, and mining. The device is suitable for electrical maintenance and allows for testing and troubleshooting both inside and outside all explosive atmospheres, without compromising on compliance or measurement performance. The MTX 3297Ex can be used outside of ATEX zones and in all industrial sectors, is highly networkable, and offers optimal performance for the industry. Measurement data can be saved on a PC using the SX-DMM software, which can be downloaded for free.
Measurements:
- Voltage
- Current
- Resistance (continuity, semiconductor junction)
- Capacitance
- Frequency (duty cycle / pulse width)
- Temperature
- AC/DC current measurement with clamp with selectable conversion ratio
Functions:
Specific measurement functions:
- AC voltage with low impedance VLowZ in the presence of stray voltages
- Low-pass filter for PWM signal measurement
Analysis and diagnostic functions:
- MIN, MAX, Peak+, Peak-
- Difference ΔX and relative measurement ΔX/X
- Duty cycle and pulse width
Additional advantages:
- Designed and manufactured in France
- 3-year warranty.
Multimeter
EUR2001,32
Metrix MTX 3297Ex Hand-held multimeter digital Ex-protected CAT III 1000 V, CAT IV 6
CAT III 1000V, CAT IV 600V
4. Metrix Differential probe touch
The active differential probe expands any oscilloscope with a differential input for safely measuring signals at floating potential. It features a switch for the division ratio.
5. Metrix Hand Multimeter MTX3291 Calibr
Strengths: Large illuminated LC display measuring 7 x 52 mm for simultaneous display of multiple parameters. Analysis functions: REL monitoring function with timestamp, PEAK + / and versatile additional features. Illuminated control buttons. Optimized user-friendliness: sealed housing IP67, safety sockets IEC 61-1-1 V CAT III/6 V CAT IV, power supply via battery or Ni-MH rechargeable battery (with external charger), contextual connection display on the screen. Advanced multimeter with additional measurement functions in the selected measurement mode: relative measurements or direct current measurements with clamp current transformer (with mV output), adjustable transformer ratios. USB networking via included SX-DMM software and SCPI programming commands. Description ASYC IV MTX 3291 - The new benchmark for multimeters. The portable digital multimeters enable direct measurement of the most important electrical quantities. They feature an innovative design and are compact, robust, waterproof, and ergonomic. Simple multimeter with LCD display 70 x 52 mm with very good readability. Contextual display of connection terminals on the screen. Automatic range selection for current, 1 single socket up to 10 A. Auxiliary measurements complementing the main measurement to simplify analysis. Monitoring: MIN/MAX and AVG data with relative time recording, voltage and current peaks. SX-DMM software for real-time data processing on a PC. And much more... IP67, splash-proof and dust-proof, perfectly suited for outdoor use. Power supply via 4 standard AA batteries or 4 rechargeable Ni-MH batteries HX0051B (optional) via external module. Autonomy of up to 400 hours in battery operation.
6. Metrix Chauvin Arnoux digital table oscilloscope with 2 channels
The DOX2070B is a very user-friendly 2-channel oscilloscope in a space-saving shallow housing, specifically designed for laboratory workstations. With the DOX2070B bench oscilloscope, all signals can be displayed and analyzed.
Multimeter
−11%
EUR807,63 was EUR902,39
Metrix Chauvin Arnoux digital table oscilloscope with 2 channels
CAT II 300V
7. Metrix TRMS AC + DC Digital Multimeter
The MTX 204 is easy to use yet highly powerful. The device fits comfortably in the hand and can be easily stored in a toolbox, making it readily available for electricians on-site. With the MTX 204 TRMS AC/AC+DC, distorted signals can be measured accurately and stably, allowing for fault detection. It also measures frequency and duty cycle.
The multimeter offers several practical advantages:
- Holder for test probes spaced 19 mm apart for easier measurement at outlets
- Adjustable folding stand for positioning at various angles
- Built-in light for precise illumination of the measurement point in dark environments
Maintenance work on electrical systems in office or commercial buildings is particularly simplified by the low impedance voltage measurement (VLowZ), as it reliably suppresses phantom voltages often found in computer networks. Troubleshooting electronic components is also convenient through resistance, capacitance, diode testing, etc. Due to its ease of use, the MTX 200 is particularly interesting for maintenance technicians, who can quickly locate defective components or connections. User safety is guaranteed by the NCV function, which indicates the presence of dangerous voltages without contact by changing the screen color. This allows for easy localization of 230 V mains voltage carrying cables.
8. Metrix Hand multimeter analog MX1 Cal
Shock-resistant and splash-proof analog multimeter suitable for any environmental conditions, equipped with extensive protective features. The MX series includes an LED display for a blown fuse. External voltages during resistance measurements are indicated by an acoustic signal. All measurement ranges are protected against overload by fuses or electronic devices.
9. Metrix Current clamp MX 350
The Metrix multimeters are equipped with all the functions of a clamp meter and a full-fledged multimeter. They are the ideal tools for every electrician and electrical technician. The compact and ergonomic model MX 350 is especially designed for applications in smaller electrical installations with currents up to 400 A, such as homes, small craft, or commercial enterprises.
10. Metrix Hand Multimeter digital MTX202
With an operating temperature range of -20 °C to +55 °C, an IP54 protection rating, and double insulation, the devices can be used even under challenging conditions. The MTX 202 and MTX 203 meet all the requirements of electricians for standard measurements (voltage, current, resistance).
Designed for daily use, the device fits comfortably in the hand and can be easily stored in a toolbox, making it readily available for electricians on-site.
With the MTX 202 and MTX 203, installers and maintenance technicians can also measure temperatures. The included temperature probe with K-type thermocouple allows for monitoring heating systems, for example.
Maintenance work on electrical installations in office or commercial buildings is particularly simplified by the low impedance voltage measurement (VLowZ), as it reliably suppresses phantom voltages that often occur in computer networks.
Troubleshooting electronic components is also made easy through measurements of resistance, capacitance, diode testing, and more.
Thanks to its user-friendly design, the MTX 202 and MTX 203 are especially appealing to maintenance technicians who can quickly identify faulty components or connections.
User safety is ensured at all times by the NCV function, which indicates the presence of dangerous voltages non-contact through a color change on the display. This allows for easy localization of 230 V mains voltage-carrying cables.
