Best selling Multimeter from Peaktech
On this page you'll find a ranking of the best Peaktech products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Peaktech P 1032 Contactless AC voltage tester
The new voltage tester P 1032 is used for non-contact detection of AC voltages on live lines and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 12V AC. When the device is switched on, the tip lights up green if no voltage is present. If AC voltage is present at the measuring point, this is visually indicated by a red flashing LED and the integrated buzzer sounds. In addition, a vibration motor ensures that detected voltages are perceived even in noisy and cluttered work environments. If the user holds down the 12V toggle button, the test probe glows yellow. Now the sensor is more sensitive and the frequency of the acoustic and optical signal changes depending on the distance of the voltage under test. The integrated LED flashlight can be switched on at any time, even if the actual voltage tester is switched off. In addition, the device can be transported practically and safely with the pocket clip. The ergonomic and modern design, as well as the many practical features and the high user safety with overvoltage category IV 1000 V perfectly round off the profile of the PeakTech 1032 voltage tester.
2. Peaktech P 2170 LCR-Meter
This digital LCR meter with ESR (Equivalent Series Resistance measurement) is equipped with many features and, due to its compact design, is excellent for both component testing in the workplace and for various service and maintenance tasks. The illuminated multifunction display with bar graph and a high measurement frequency of up to 100 kHz allows for highly precise work. Components can be tested using the included Kelvin clips (4-wire) or directly through the front test sockets. The included PC software enables the measured values to be recorded, saved, and analyzed. The power supply can be provided either by the included batteries or by a separately available universal power supply.
3. Peaktech P 3201 Analogue multimeter
This analog multimeter features a variety of measurement functions, including AC and DC voltage measurement, direct current, resistance measurement with continuity testing, and dB measurement. The analog technology only requires batteries for functions such as resistance measurement, where the multimeter needs to output a test voltage. In contrast, voltage and current measurements do not require batteries.
4. Peaktech P 3349 True RMS digital multimeter
The new PeakTech 3349 has been specifically designed for use in crafts and industry, offering a variety of practical features that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in low-light conditions. Additionally, there is a bright LED flashlight on the back of the device for illuminating the measurement area. Above the 6000-count digital display, there is a multi-colored LED bar. Depending on the active measurement function, this lights up green for continuity testing, red for detected voltage in NCV mode, yellow for measuring large capacitances, or blinks red in the active phase tester mode (LIVE). It has been manufactured according to the latest development standards and features a double-insulated molded housing with rubber coating, as well as a service flap on the back that allows for not only battery replacement but also fuse changes. The measurement range selection is manual on this device, enabling particularly fast response times.
5. Peaktech P 2005 A Digitalmultimeter
The new PeakTech 2005 A offers a wide range of measuring functions for electrical parameters for every user in industry, trade, education, hobby and the laboratory. It has been manufactured according to the latest development aspects and has a double-insulated injection moulded housing with rubber coating, a service flap on the back which can be used not only to replace the battery but also to change the fuses. The manual range selection enables a very fast response time and measured values can be easily read on the illuminated display. The PeakTech 2005 A has a wide range of functions, such as voltage and current measurement, resistance measurement, capacitance and inductance measurement and it is also able to measure transistors. Due to the high overvoltage category CAT III up to 1000V, you can use this device safely on electrical installations and systems.
6. Peaktech P 1040 TrueRMS Digital Multimeter
The new PeakTech 1040 is a compact TrueRMS multimeter housed in a sturdy casing, designed for use in electrical work. Despite its small size, this new development offers all the essential measurement functions. Notably, it features the ability to check batteries with the built-in battery tester. The manual range selection allows for a very quick response time, and measurements can be easily read on the display. User safety is ensured by the overvoltage category CAT III up to 600 V and the double-insulated casing, while batteries and ceramic fuses can be quickly accessed for replacement through the battery compartment located on the back of the device.
7. Peaktech P 4090 Bench multimeter
This digital bench multimeter features highly accurate measurement functions and a large 4 ½-digit LCD display with backlighting. It can be used both in the laboratory with mains power and in mobile service with battery operation, providing a wide range of application possibilities. With the optically isolated USB interface and the software, all measurement results can be displayed and stored on a PC. The graphical software includes exclusive dynamic scaling, making very small changes in measurement values visible. When connected to a PC, this bench multimeter becomes an extremely versatile data logger. The useful additional functions, such as True RMS measurement, relative value measurement, maximum/minimum hold function, and measurement hold function, enhance the versatility of this device.
8. Peaktech P 1336 Digital storage oscilloscope
The PeakTech 1336 is an affordable 50 MHz 2-channel digital storage oscilloscope featuring a high-resolution TFT color display and a wide range of additional functions. It offers a sampling rate of up to 500 MS/s and impresses with its high quality and ease of use at an excellent price-performance ratio. For a quick display of any incoming waveform, simply press the autoset button, and the oscilloscope will automatically find the best possible display. With the autoscale function, the time base scaling can be easily adjusted to suit the user’s needs.
9. Peaktech P 1211 Tablet oscilloscope
The PeakTech 1211 is a new innovative oscilloscope designed to resemble the size and style of a standard tablet. With this tablet oscilloscope, it is possible to capture any normal measurement and waveform just like with a stationary oscilloscope. The PeakTech 1211 is a four-channel oscilloscope with a bandwidth of 70 MHz and can perform various measurements with a sampling rate of up to 1 GS/s. Settings can be quickly and accurately adjusted using the 8-inch touchscreen as well as the function keys. The intuitive menu navigation allows users to conduct optimal analysis of the measured quantities on systems or devices. The PeakTech 1211 is a tablet oscilloscope that finds applications in nearly all areas of electrical engineering due to its mobility and excellent usability.
10. Peaktech P 1207 Tablet oscilloscope
The PeakTech 1207 is a new innovative oscilloscope designed to resemble the size and form factor of a standard tablet. With this tablet oscilloscope, it is possible to capture any normal measurement and measurement form just like with a stationary oscilloscope. The PeakTech 1207 is a two-channel oscilloscope with a bandwidth of 120 MHz, capable of performing various measurements with a sampling rate of up to 1 GS/s. The built-in multimeter significantly expands the oscilloscope's range of applications. Settings can be quickly and precisely adjusted using the 8-inch touchscreen as well as the function buttons. The PeakTech 1207 is a tablet oscilloscope that finds applications in nearly all areas of electrical engineering due to its mobility and excellent versatility.
