Best selling Side-cutting pliers from Knipex
On this page you'll find a ranking of the best Knipex products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Knipex High Leverage Diagonal Cutter
High-performance diagonal cutting pliers designed for tough, continuous use. They offer high cutting performance with minimal effort due to the optimal coordination of cutting edge angle and leverage ratio. The precise cutting edges are additionally induction-hardened, with a cutting edge hardness of approximately 64 HRC, making them suitable for all types of wire, including piano wire.
2. Knipex Electronic Super Knips
The Electronic Super Knips are precision pliers designed for ultra-fine cutting tasks, particularly in electronics and precision mechanics. They feature ground, very sharp cutting edges without bevels. The precisely shaped tips allow for cutting wires close to a surface, starting from a diameter of 0.2 mm. The shear cut has a controlled micro-cutting edge misalignment, ensuring the most precise cutting of even the thinnest wires while providing a long service life. The pliers offer extremely smooth movement to minimize operator fatigue and are equipped with a quick opening mechanism and an opening limiter.
3. Knipex StepCut
Knipex StepCut
Small, lightweight, powerful: comfortable cutting without crushing and only 160 mm in size. Significantly less effort required: the stepped design cuts wires one after the other. Cutting is up to 40% easier than with conventional cable cutters of the same length. The ergonomic handle design ensures an optimal cutting feel, even with larger cable diameters.
Cuts multi-stranded, fine-wired copper and aluminum cables up to Ø 15 mm (50 mm²). Cuts solid copper and aluminum cables up to 5 x 4 mm². Cuts without crushing. The bolted connection ensures precise, effortless, and durable performance. Not suitable for steel wire and hard-drawn copper conductors. The cutting edges are additionally induction-hardened, with a cutting edge hardness of approximately 56 HRC.
4. Knipex Wire Rope Cutter
Wire rope cutter for high-strength wire ropes up to 4 mm in diameter and cables up to 6 mm in diameter. It features noticeably light, high-precision cutting thanks to a unique, patent-pending joint design. The compact size and low weight contribute to a high performance level, making it particularly durable at only 172 g. This cutter is designed for intensive use, providing up to 30% less physical effort compared to wire rope cutters of the same length. It has a double-mounted box joint design for a high level of stability, and the cutting edges are additionally induction-hardened, with a cutting edge hardness of approximately 64 HRC. The cutter is secured by a locking device during transport.
5. Knipex Diagonal Cutter
Side cutter. The indispensable side cutter for versatile use. High-quality materials and precise workmanship ensure a long service life. Precision cutting for soft and hard wire. Clean cuts on thin copper wires, even at the cutting tips. Slim head shape for use in hard-to-reach work areas. Capacity for half-moon, capacity in mm², square connection capacity, square capacity, step square capacity, triangular gripping range, hexagonal gripping range, round gripping range, square gripping span.
6. Knipex Cable Shears
Cable shears for cutting copper and aluminum single conductors as well as multiple stranded cables. Not suitable for steel wire and wire ropes. Precision-ground, hardened blades provide a clean and smooth cut without crushing or deformation. A pinch guard prevents operators' fingers from being pinched. Features an adjustable bolted joint and a bolted cutter head that is replaceable.
7. Knipex Wire Rope and ACSR-Cable Cutter
Wire rope and ACSR-cable cutter. Suitable for cutting wire ropes, steel rods, copper, and aluminium cables. Designed for cutting overhead cables with strain relief wire (ACSR cables). Angular cutting blades allow for cutting of single rope wire. Features an optimum transmission ratio for high cutting performance and low weight.
8. Knipex Präzisions-Elektronik-Seitenschneider
Precision electronics diagonal cutter. Precision pliers for ultra-fine cutting work, such as in electronics and fine mechanics. Very precisely ground and sharp cutting edges with very small bevels for exact cutting on delicate electronic components. Also available without bevel for flush cutting. Cutting edges are additionally induction-hardened, with a cutting edge hardness of approximately 64 HRC. Bolted joint with carefully manufactured joint surfaces for even, low-friction movement throughout the entire opening range. Smooth-running double spring for a gentle and even opening. Ergonomically optimized multi-component handles. Capacity half-moon, capacity in square millimeters, square drive capacity, square capacity, step-like square capacity, triangular capacity, clamping width hexagon, clamping width round, clamping width square.
9. Knipex Wire rope scissors L.190mm with fixing eye BK burnished Handle 2Comp. sheaths Cutting value
95 62 190 T BK wire rope cutter with two press profiles for end sleeves on Bowden sheaths and end caps for wire rope hoists. Comfortable working due to handy, slim design and internal opening spring. Bolted joint for precise blade guidance, adjustable. High transmission ratio for effort-saving work. Cutting edge hardness approximately 64 HRC. Pliers with fastening eye for attaching a guard.
Cutting values:
- Piano wire (diameter): Ø 2.5 mm
- Cu-cable - stranded (diameter): Ø 7.0 mm
- Wire rope (diameter): Ø 5.0 mm
- Medium hard wire (diameter): Ø 4.0 mm
- AWG: 8
- Fall protection: yes
Other technical features:
- Weight: 318 g
- Head: burnished
- Joint design: screwed joint.
Side-cutting pliers
EUR79,06
Knipex Wire rope scissors L.190mm with fixing eye BK burnished Handle 2Comp. sheaths Cutting value
321 mm
10. Knipex TubiX Pipe cutter
The Knipex TubiX pipe cutter features a QuickLock one-handed locking mechanism that allows for independent holding and clamping on the pipe. It enables easy one-handed pressing for quick adjustment to different pipe sizes. The cutter is designed for comfortable use, with high-quality needle bearings in the cutting wheel and guide rollers that allow for effortless cutting. It can cut pipes with a diameter of 6 to 35 mm (1/4 inch to 1 3/8 inch) and a wall thickness of up to 2 mm. The cutting wheel is made of high-quality ball bearing steel and features a practical quick-change system for the cutting wheel, with a replacement wheel stored under the feed cylinder. Additionally, it comes with a precision-ground deburring tool to facilitate deburring.
