Best Helios products in the Ventilation fan category
On this page you'll find a ranking of the best Helios products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Helios HELI REW150/2 Pipe insert fan IP44 1ph 29W 230V 50Hz
The HELI REW150/2 duct fan is a powerful and efficient axial fan specifically designed for ventilation in various applications. With an airflow rate of 330 m³/h, this fan is ideal for moving air in small to medium-sized spaces where low resistance is present. The fan is directly driven and features a duct sleeve with smooth plastic ends, suitable for insertion into pipes with a diameter of 150 mm. The impeller, equipped with five profiled blades, ensures high efficiency and effective air circulation. The alternating current shaded pole motor is equipped with thermal overload protection, ensuring safe operation during continuous use. Additionally, the ball bearings are maintenance-free and permanently lubricated, enhancing the longevity of the device. The fan is reversible, providing added flexibility in application.
- High airflow rate of 330 m³/h for effective ventilation
- Maintenance-free, permanently lubricated motor for long-term use
- Thermal overload protection for increased safety during continuous operation
- Reversible design for flexible application options
- Suitable for pipes with a diameter of 150 mm.
2. Helios Mini fan
Water-resistant plastic housing (IP 45) with grille cover. The upward-facing slats completely prevent visibility into the dirty intake opening and the built-in pre-rotor. Plug-in claw fastening for tool-free installation in pipes with a nominal diameter of 100 mm. Touch protection according to DIN EN 294. With a delay switch, delay time of 2 to 8 minutes.
3. Helios DN100 M1/100 F
MiniVent M1 small fan, with 2 power levels (90/75 m³/h) and humidity control. The run-on time can be set to approximately 6, 12, 18, or 24 minutes, and the electronic function can be adjusted to either the high or low power level. With its excellent design, the MiniVent M1 blends harmoniously into any environment, even in stylishly designed spaces. The closed, aesthetically pleasing facade completely prevents visibility into the dirty fan opening. It comes standard with a tightly closing backdraft damper. Thanks to ultraSilence technology, the noise level is at 25 dB(A) at a volume flow of 75 m³/h. Universally applicable for the ventilation of bathrooms, toilets, and other small rooms.
4. Helios Miniature fan HR90 KE
Helios Fans Mini Fan HR 90 KE
Manufacturer: Helios Fans
Description: Mini fan with ball bearings
Type: HR 90 KE
Mains frequency: 50 Hz
Rated voltage: 230 V
Installation type: Surface-mounted
Housing material: Plastic
Color: White
Airflow: 80 m³/h
Protection class (IP): IP45
Nominal diameter: 100 mm
Configuration: Standard
Design: Axial
Direction: Supply and exhaust ventilation
Additional details:
Small fan with ball bearings, splash-proof plastic housing (IP 45) with grille cover. The upward-facing slats completely prevent visibility into the intake opening and the built-in pre-rotor. Snap-fit mounting for tool-free installation in ducts with a nominal diameter of 100 mm. Touch protection according to DIN EN 294. Impeller with 5 profiled blades made of plastic, high efficiency. AC split-pole motor with thermal overload protection for continuous operation with maintenance-free, permanently lubricated ball bearings, non-reversible.
5. Helios Wall fan
Helios HVR 150/2 RE Heliovent fan is a flush-mounted room fan designed for installation in walls, shafts, and windows. It can be used in openings with NW 150 for the ventilation of small to medium-sized rooms. The fan features a plastic housing with a louvred grille to cover the intake opening. It is equipped with a high-performance axial impeller with 8 plastic blades. The single-phase AC capacitor motor has an enclosed design, is maintenance-free, and includes thermal contacts built into the winding. The speed can be controlled by voltage reduction, and it has sealed, low-noise ball bearings with long-term lubrication. The fan is also reversible.
6. Helios HELI ELS-GUBA flush-mounted housing with fire protection shut-off damper
UP housing made of plastic with fire protection shut-off element 90, metal exhaust nozzle with automatic backdraft damper and shut-off in case of melting solder activation. Exhaust nozzle available directed upwards, rotatable to the left or right. Can be converted for rear air outlet in any position using accessory set -ARS, No. 8185. Reusable flap cleaning cover. Otherwise as ELS-GU. Connection DN80 mm. Application area for ventilation of kitchen, bathroom, or toilet. Also suitable for two-room ventilation of bathroom and toilet with accessory set -ZS, No. 8186. UP installation in ceiling or wall, also outside of 90 shafts. Connection to main line using steel pipe. One or two devices per floor up to 20 floors. The backdraft damper in fire protection housings also fundamentally meets the requirements of a cold smoke shut-off damper. For residential kitchens, a fan unit with 100 m³/h is recommended. ELS-GUBA.
Ventilation fan
EUR62,24
Helios HELI ELS-GUBA flush-mounted housing with fire protection shut-off damper
7. Helios M1/100 Toilet fan Minivent DN100 two-stage without overrun
MiniVent M1 small fan, standard model with 2 power levels (90/75 m³/h). With its excellent design, the MiniVent M1 harmoniously integrates into any environment, including sophisticated spaces. The closed, elegantly shaped facade completely prevents visibility into the dirty fan opening. It comes standard with a tightly closing backdraft damper. Thanks to the new ultraSilence technology, the noise level is just 25 dB(A) at a flow rate of 75 m³/h. It is universally applicable for ventilating bathrooms, toilets, and other small rooms.
8. Helios Apparatebau FlexPipe sealing cap FRS-VD 51 1 PA = 10 PCE
Helios FRS-VD 51 FlexPipe.
9. Helios Radial tube fan
Helios Ventilatoren radial tube fan RR 315
Manufacturer: Helios Ventilatoren
Designation: Radial tube fan
Type: RR 315
Material of housing: Steel, treated
Air volume unloaded: 1310 m³/h
Supply voltage: 230 V
Power consumption: 0.224 kW
With thermal protection: Yes
DC motor: No
Indirect drive: No
Electrical connection: Terminals
Protection class (IP): IP44
Max. air temperature: 70 °C
Motor with 2 speeds: No
Suitable for electronic control: Yes
Suitable for frequency control: No
Suitable for low current control: No
Suitable for transformer control: Yes
Pole-changing: No
Length: 257 mm
Diameter of housing: 402 mm
Duct diameter: 315 mm
Connection: Flange
Helios Ventilatoren RR 315 centrifugal tube fan is designed for direct mounting in the duct system. It is suitable for conveying medium and small air volumes against high resistance. The housing is made of galvanized sheet steel with round connection pieces adapted to standard pipes. The radial impeller features backward curved blades made of galvanized sheet steel, pressed directly onto the motor and dynamically balanced as a unit. It operates with low noise and high efficiency. The fan includes a single-phase AC external rotor motor with an enclosed design, maintenance-free, built-in thermal contacts, sealed, and low-noise ball bearings with long-term lubrication. Power control can be achieved by means of an electronic controller or step transformer. EAN: 4010184059202.
10. Helios HELI RR100A Radial Tube Fan 41W 230V 1ph 50Hz D=100mm
The HELI RR100A radial duct fan is a powerful and efficient fan specifically designed for direct installation in duct systems. With a diameter of 100 mm, it is ideal for moving medium and small volumes of air, even against high resistance. The housing is made of galvanized steel sheet, ensuring durability and stability. The fan is equipped with a radial impeller made of backward-curved plastic blades to guarantee quiet operation and high efficiency. The single-phase external rotor motor is maintenance-free and allows for flexible speed control through voltage reduction. Additionally, integrated thermal contacts provide extra safety. The sealed, low-noise ball bearings with long-term lubrication contribute to the longevity of the device and minimize maintenance efforts.
- Direct installation in duct systems for optimal air movement
- High-quality housing made of galvanized steel sheet
- Quiet operation due to special impeller design
- Maintenance-free external rotor motor with integrated thermal contacts
- Speed control possible through voltage reduction.
