Floor heating
EUR853,88
Devi Thin-bed heating mat set 140F0824 1-900 W professional DTIF 6,0qm 50x120
Top rated Floor heating
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. Devi Thin-bed heating mat set 140F0824 1-900 W professional DTIF 6,0qm 50x120
Devi Thin Bed Set 1-900 W 140F0824
Manufacturer: Devi
Description: Thin bed set 1-900 W DTIF 6.0 m², professional
Type: 140F0824
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-900 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 6 m²
Length: 12000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Additional details:
Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, assembly instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is unnecessary. The heating cable with additional protective sheath for the use of the RCD is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 6.0 m², 0.5 x 12.0 m.
2. Devi Thin-bed heating mat set 140F0825 1-1050 W professional DTIF 7,0qm 50x140
Devi Thin Bed Set 1-1050 W 140F0825
Manufacturer: Devi
Description: Thin bed set 1-1050 W DTIF 7.0 sqm, professional
Type: 140F0825
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0..1050 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 7 m²
Length: 14000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
The Devi Thin Bed Set 1-1050 W 140F0825 includes a thin bed set with a touch thermostat, a flexible sensor protection tube DN10 with a red cap, plastic nails, and installation instructions. The self-adhesive thin bed heating mat with a connection lead is pre-assembled for installation and has been specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering.
With a low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required.
The heating cable, with additional protective sheathing for the use of RCD protection, is applied to a plastic mesh. The length of the connection leads is 4.0 m.
Cold lead: 1 x 4m, 1.0 mm²
Voltage: 230 V
Rated limit temperature: 120 °C
Specific heating power: 150 W/m²
Length load: 11 W
Insulation: PVDF / FEP
Resistance tolerance: +10% / -5%
Minimum installation temperature: 5 °C
Minimum bending radius: 6 x dA
Calculation width: 50 cm
Delivery width: 48 cm
Mat height: 3.2 mm
Protection class: IPX7
Approval: EN 60335-2-96
Area: 7.0 m²
0.5 x 14.0 m
EAN: 5703466216590.
Floor heating
EUR782,22
Devi Thin-bed heating mat set 140F0825 1-1050 W professional DTIF 7,0qm 50x140
3. Devi Thin-bed heating mat set 140F0820 1-450 W professional DTIF 3,0qm 50x60
Devi Thin Bed Set 1-450 W 140F0820
Manufacturer: Devi
Description: Thin bed set 1-450 W DTIF 3.0 sqm, professional
Type: 140F0820
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-450 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 3 m²
Length: 6000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Additional details: Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and designed specifically for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to the low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable with additional protective sheath for use with RCD protection is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 3.0 m², 0.5 x 6.0 m.
4. Devi Thin-bed heating mat set 140F0823 1-750 W professional DTIF 5,0qm 50x100
Devi Thin Bed Set 1-750 W 140F0823
Manufacturer: Devi
Description: Thin bed set 1-750 W DTIF 5.0 sqm, professional
Type: 140F0823
With carrier mat: Yes
Fixation of heating conductor: Glued
Self-adhesive: Yes
Connection power: 0-750 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: Yes
Suitable as outdoor heating: No
Suitable as roof heating: No
Area: 5 m²
Length: 10000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: Yes
With room thermostat: Yes
With floor temperature sensor: Yes
Further details:
Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, and installation instructions. The self-adhesive thin bed heating mat with a connection lead is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection leads is 4.0 m.
Cold conductor: 1 x 4m, 1.0 mm²
Voltage: 230 V
Rated limit temperature: 120°C
Specific heating power: 150 W/m²
Length load: 11 W
Insulation: PVDF / FEP
Resistance tolerance: +10% / -5%
Minimum installation temperature: 5°C
Smallest bending radius: 6 x dA
Calculation width: 50 cm
Delivery width: 48 cm
Mat height: 3.2 mm
Protection class: IPX7
Approval: EN 60335-2-96
Area: 5.0 m²
Dimensions: 0.5 x 10.0 m
EAN: 5703466216576.
5. Devi Thin-bed heating mat set 140F0817 1-225 W professional DTIF 1,5qm 50x30
Devi Thin Bed Set 1-225 W 140F0817
Manufacturer: Devi
Description: Thin bed set 1-225 W DTIF 1.5 sqm, professional
Type: 140F0817
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: yes
Connection power: 0..225 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 1.5 m²
Length: 3000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Additional details: Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable with additional protective sheath for the use of RCD protection is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120°C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Minimum bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 1.5 m², 0.5 x 3.0 m, EAN: 5703466216514.
6. Devi Thin-bed heating mat set 140F1704
Devi Thin Bed Heating Mat Set 140F1704
Manufacturer: Devi
Description: Thin Bed Heating Mat Set 0.5 x 6.0
Type: 140F1704
Design: Heating Cable
With Carrier Mat: Yes
Fixation of Heating Cable: Glued
Self-Adhesive: Yes
Connection Power: 0-450 W
Power: 150 W/m²
Heating Cable Load: 11 W/m
Number of Cold Leads: 1
Length of Cold Leads: 4000 mm
Suitable for Wet Rooms: Yes
Suitable as Surface Heating: No
Suitable as Roof Heating: No
Area: 3 m²
Length: 6000 mm
Width: 500 mm
Thickness: 4 mm
With Controller: Yes
With Room Thermostat: Yes
With Floor Temperature Sensor: No
Additional Details:
Thin bed set with Opti clock thermostat, flexible sensor protection tube DN10, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 4 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 2.3 m. Cold lead: 1 x 2.3 m, 2 x 1.0 mm², Voltage: 230 V, Rated Limit Temperature: 90 °C, Specific Heating Power: 150 W/m², Length Load: 11 W, Insulation: Lead-free PVC / FEP, Resistance Tolerance: +10% / -5%, Minimum Installation Temperature: 5 °C, Minimum Bending Radius: 6 x dA, Calculation Width: 50 cm, Delivery Width: 48 cm, Mat Height: 4 mm, Protection Class: IPX7, Approval: IEC 60335-2-96, Area: 1.0 m², 0.5 x 6.0 m.
7. Devi Thin-bed heating mat set 140F0826 1-1200 W professional DTIF 8,0qm 50x160
Devi Thin Bed Set 1-1200 W 140F0826
Manufacturer: Devi
Description: Thin bed set 1-1200 W DTIF 8.0 m², professional
Type: 140F0826
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: yes
Connection power: 0-1200 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold leads: 1
Length of cold lead: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 8 m²
Length: 16000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Further details:
Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection lead is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor temperature control system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable with additional protective sheath for the use of RCD protection is applied to a plastic mesh. The length of the connection leads is 4.0 m. Cold lead: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum laying temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 8.0 m², 0.5 x 16.0 m.
Floor heating
EUR872,–
Devi Thin-bed heating mat set 140F0826 1-1200 W professional DTIF 8,0qm 50x160
8. Devi Thin-bed heating mat set 140F0822 1-600 W professional DTIF 4,0qm 50x80
Devi Thin Bed Set 1-600 W 140F0822
Manufacturer: Devi
Description: Thin bed set 1-600 W DTIF 4.0 sqm, professional
Type: 140F0822
With carrier mat: yes
Heating cable fixation: glued
Self-adhesive: yes
Connection power: 0-600 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 4 m²
Length: 8000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Additional details:
Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection lead is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is mounted on a plastic mesh. The length of the connection leads is 4.0 m. Cold lead: 1 x 4m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum laying temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 4.0 m², 0.5 x 8.0 m.
9. Devi Thin-bed heating mat set 140F0819 1-375 W professional DTIF 2,5qm 50x50
Devi Thin Bed Set 1-375 W 140F0819
Manufacturer: Devi
Description: Thin bed set 1-375 W DTIF 2.5 sqm, professional
Type: 140F0819
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0.375 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 2.5 m²
Length: 5000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Further details:
Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, and installation instructions. The self-adhesive thin bed heating mat with a connection lead is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is mounted on a plastic mesh. The length of the connection leads is 4.0 m. Cold lead: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.5 m², 0.5 x 5.0 m, EAN: 5703466216538.
10. Devi Thin-bed heating mat set 140F0827 1-1350 W professional DTIF 9,0qm 50x180
Danfoss Thin Bed Set 1-1350 W 140F0827
Manufacturer: Danfoss
Designation: Thin Bed Set 1-1350 W DTIF 9.0 sqm, professional
Type: 140F0827
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-1350 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 9 m²
Length: 18000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Additional details:
Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in angular and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 9.0 m², 0.5 x 18.0 m, EAN: 5703466216613.
Floor heating
EUR1006,78
Devi Thin-bed heating mat set 140F0827 1-1350 W professional DTIF 9,0qm 50x180