Your data. Your choice.

We use cookies and similar technologies to provide you with the best shopping experience as well as for marketing purposes. Please accept, decline or manage the use of your information.

Legal noticePrivacy notice

Best selling Car stereo installations

Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.

1. Monacor Fga-40mf

Signal interference and hum loops, which can occur when connecting PC sound cards or notebooks to amplifiers, are avoided with the ground separating filter. It features galvanically isolated inputs and outputs, equipped with 2 Cinch sockets and 2 Cinch plugs. 

2. FeinTech ATG00101

The ATG00101 effectively prevents humming and sound disturbances between powered devices by galvanically isolating the ground connection in audio connections. The ground isolator removes interference such as the typical 50 Hz hum, ensuring clear audio transmission without sound loss. It is suitable for all connections with 3.5 mm jack plugs, for example, between a computer and active speakers, a television and AV receiver, a smartphone and car radio, or stereo systems. The device eliminates ground loops without compromising sound quality. It is simply plugged in between the devices to be connected and requires no power supply or additional connection cables. With a compact size of just 60 x 20 x 20 mm, it can be discreetly placed. The ground isolator is particularly useful in vehicles, where sound disturbances often occur when a smartphone is simultaneously playing music and charging. Thanks to the true galvanic isolation, these noises are reliably eliminated. Technical specifications: Impedance: 600 Ohm, frequency range: 20 Hz to 20,000 Hz, connections: 2 x 3.5 mm stereo jack, bidirectional. 

3. ACV 1-DIN RB Megane Scenic

Radio Trim 1-DIN

Many car manufacturers install their own vehicle-specific radios that are visually adapted to the center console. For this reason, you need a suitable radio trim for replacing it with a standard DIN or double DIN radio. Additionally, vehicle-specific radio connection cables, antenna adapters, steering wheel remote control adapters, camera adapters, and active system adapters are often required. Our support team is happy to assist you in making the right selection.

Suitable for the following vehicles:
- Renault Mégane I Coach/Coupé (BA/DA) 10/1995 - 06/2002, 2/3-door / 4/5-door
- Renault Mégane I Scénic (JA) 11/1996 - 08/1999, Van
- Renault Mégane I Classic (LA) 02/1997 - 07/2003, Sedan
- Renault Mégane I (EA) 04/1997 - 08/2003, Convertible
- Renault Mégane I Grandtour (KA) 03/1999 - 07/2003, Station Wagon
- Renault Scénic (JA) 09/1999 - 06/2003, Van

Color: dark gray. 

4. Diverse Flat seat box for Ducato / Jumper / Boxer type 250/290 from 2006 onwards

5. ACV 381114-15-1 Car radio installation panel double DIN Suitable for (car brand): Ford

The ACV 381114-15-1 car radio installation frame is a specially designed solution for installing double DIN car radios in various Ford models. This radio frame allows standard radios to be seamlessly integrated into the center console, which is often customized for specific vehicle models. The frame comes with a metal bracket, a decorative cover frame, a mounting kit, and a detailed installation manual to facilitate the installation process. Using this frame ensures a professional and appealing finish that maintains the aesthetics of the vehicle's interior. It is compatible with a variety of Ford vehicles, including the Fiesta, Focus, Kuga, and many more, making it a versatile choice for Ford owners looking to upgrade their audio system.

- Compatible with multiple Ford models, including Fiesta, Focus, and Kuga
- Package includes metal bracket, decorative cover frame, and mounting kit
- Allows replacement of factory radios with standard double DIN radios
- Includes a detailed installation manual for easy installation. 

ACV 381114-15-1 Car radio installation panel double DIN Suitable for (car brand): Ford
Car stereo installations
−10%
EUR38,57 was EUR42,94

ACV 381114-15-1 Car radio installation panel double DIN Suitable for (car brand): Ford

6. ACV 11-1327-01 Loudspeaker adapter cable Suitable for (car brand): Ford, Opel

7. Monacor Ground filter, stereo - line, 3.5mm jack cinch

Ground isolator with a compact design, preventing signal interference and hum loops that may occur when connecting PC sound cards or laptops to an amplifier.

- Galvanically isolated inputs and outputs
- 2 RCA plugs
- 3.5 mm stereo plug
- Input/output impedance: 20 kΩ
- Frequency range: 20-30,000 Hz
- THD: < 0.01%
- Transmission ratio: 1:1
- Dimensions: Ø 24 mm x 38 mm, weight: 32 g
- Length including connection cable: approximately 115 cm

Safety notes and warning messages: The unit is suitable for indoor use only. Protect it against dripping water, splash water, high humidity, and heat (admissible ambient temperature range: 0 - 40 °C). If the unit is to be permanently taken out of operation, dispose of it at a local recycling plant in an environmentally friendly manner. 

8. ACV 281001-02 Car radio installation panel DIN Suitable for (car brand): Alfa Romeo

Radio Frame 1-DIN Alfa

Many car manufacturers install their own vehicle-specific radios that are visually adapted to the center console. For this reason, you need a suitable radio frame to replace it with a standard DIN or double DIN radio. Additionally, vehicle-specific radio connection cables, antenna adapters, steering wheel remote control adapters, camera adapters, and active system adapters are often required. Our support team is happy to assist you in making the right selection.

Suitable for the following vehicles: Alfa 147 (Type 937) 01/2001 - 04/2010, Alfa GT (Type 937) 02/2004 - 10/2010. Color: silver. 

9. Caliber Audio Technology RAF1001 car radio installation panel DIN Suitable for (car brand): BMW

The Caliber RAF1001 car radio installation frame is a specially designed stereo installation kit intended for integrating car radios into BMW 3 Series vehicles (E46) from 1998 to 2005. This product allows for a seamless installation, ensuring that the new car radio fits perfectly into the vehicle's interior. The installation frame is made from durable material and offers an appealing look that harmoniously blends with the existing design of the vehicle. With this installation kit, upgrading to a modern car radio becomes a breeze, without compromising on aesthetics or functionality. The use of the RAF1001 kit ensures a secure and stable mounting, allowing the car radio to be utilized optimally.

- Compatible with BMW 3-Series E46 (1998 - 2005)
- Robust and durable construction
- Easy installation for seamless integration. 

Caliber Audio Technology RAF1001 car radio installation panel DIN Suitable for (car brand): BMW
Car stereo installations
−7%
EUR14,44 was EUR15,46

Caliber Audio Technology RAF1001 car radio installation panel DIN Suitable for (car brand): BMW

10. ACV 2-DIN RB Mercedes E-Class (W 211/ S 211) CLS (219) black

Radio bezel 2-DIN for Mercedes E-Class (W211) 03/2002 - 02/2009 Limousine, Mercedes E-Class (S211) 03/2003 - 10/2009 T-Model, and Mercedes CLS (219) 2004-2010. Please note: The electric storage compartment has no function after removing the original radio. Colour: black. Scope of delivery includes: radio bezel, sheet metal frame, covering frame, mounting kit, and installation instructions. Many car manufacturers install their own vehicle-specific radios, which are optically adapted to the centre console. For this reason, you need a matching radio bezel to replace a standard DIN or double DIN radio. In addition, vehicle-specific radio connection cables, antenna adapters, steering wheel remote control adapters, camera adapters, and active system adapters are often required. Our support team will be happy to help you make the right choice. 

Product order
See all products