Best selling Engravers
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. XTool D1 Pro 20W - Higher Accuracy Diode DIY Laser Engraving & Cutting Machine
XTool D1 Pro - Higher accuracy DIY laser engraving and cutting machine. An improved laser enhances the cutting and engraving effect. It utilizes innovative dual-laser technology to combine two laser beams into one point. The compressed point delivers higher power, better cutting ability, increased speed, and superior results at the same electrical power. The performance of the 10W dual-laser xTool D1 is equivalent to that of a 15W laser cutting machine with a single laser.
Wood and acrylic cutting (one-pass). Discover the beauty of acrylic. Limited by the properties of the material itself, the semiconductor laser (blue laser) can only cut dark acrylic materials. Direct engraving on stainless steel and metal is possible without coating - resulting in faster speeds and darker engraved patterns. Higher productivity at increased speeds. Enhance accuracy to an extreme level.
Why does the D1 Pro offer the highest engraving and cutting accuracy? It achieves a repositioning accuracy of less than 0.007 inches. Focus adjustment is simple and precise, taking only 3 steps within 5 seconds. Pull down the original focus lever, slide the laser slider to bring the focus lever close to the material surface, and pull the focus lever back up.
Bring your creations to life with over 340 colors. The super strong 20W laser beam oxidizes the metallic surface in an instant, producing vibrant colors on the engraved metal. Limit switches in all directions trigger an alarm if the laser head is about to reach the device's limits. Safe to use: The emergency stop switch activates upon detecting flames, smoke, or tipping.
2. Creality Laser Falcon Engraver-5W
The Laser Falcon takes into account both engraving and cutting performance by utilizing point-compressed poly-lens laser technology, achieving precision in both areas up to 0.1 mm. The dot size has been compressed from 0.32 x 0.14 mm to 0.12 x 0.06 mm. As a result, engraving accuracy and speed are increased by more than six times. The results are finer, with less burr and curling. The CR-Laser Falcon eliminates the hassle of multiple control buttons. The illuminated button can not only control the engraving or cutting process but also indicate the operational status of the machine, allowing you to identify the working mode. Continuous blue light emissions from the laser head provide a preview of the engraving or cutting area. This way, you can easily determine whether the position is your desired engraving area. If not, you can make adjustments. For batch engraving, you can use the auxiliary grid plate for the same workspace confirmation.
3. LaserPecker 2 / 3 Protective cover
Protective cover for Laserpecker 2 / 3
The Laserpecker LP23PC protective cover is an essential accessory for users of Laserpecker laser engravers. It not only offers optimal safety but also enhances productivity by being a key piece of equipment.
Thoughtful design
The product is made of high-quality plastic, acrylic, and aluminum, which guarantees its durability and aesthetics. The design of the cover combines functionality with a modern look, providing solid protection for the device. With dimensions of 287 x 263 x 257 mm, which can be adjusted with additional accessories, the cover offers flexibility according to the user's needs. In addition, its lightweight of 1443.5 g makes it easy to handle and transport without compromising the mobility of the kit.
Certifications and safety
The LP23PC lid has a number of certifications (CE, ROHS, FCC, PSE, CA65, UKCA, KC), confirming its high quality and compliance with international safety standards. As a result, users can rest assured that they are choosing a reliable and safe product. Furthermore, the advanced laser wavelength filtering technology in the 190 nm - 550 nm and 800 nm - 1100 nm ranges makes this product unique. It provides effective protection for the eyes from potentially harmful radiation, increasing safety during use.
4. LaserPecker LP 4 Deluxe
LaserPecker 4 Deluxe is a breakthrough in engraving technology. Its unique portable design with two lasers allows for the processing of a wide variety of materials. With a larger working area, enhanced safety features, and high-precision engraving, it is the perfect tool for professionals and hobbyists seeking efficiency and versatility.
LaserPecker 4 is equipped with two lasers – a blue laser for engraving on wood, acrylic, glass, leather, paper, stone, ceramics, and more, and a red laser that is ideal for processing metals such as stainless steel, gold, silver, and aluminum, as well as plastics and more. This versatility expands the creative and practical possibilities for the user.
Technical specifications:
- Laser type: 10 W 450 nm blue diode laser, 2 W 1064 nm infrared laser
- Work area: 160 x 120 mm (base), 160 x 300 mm (with guide extension)
- Working speed: 2000 mm/s
- Preview speed: 16000 mm/s
- Preview types: Center point, contour frame, contour preview mode
- Engraving precision: 0.003 mm
- Resolution: 1K/2K/4K/8K
- Engraving depth: 8 mm
- Supported formats: PC: G-Code/JPG/PNG/BMP/SVG/DXF, etc. Vector format, APP: JPG/PNG/G-Code
- Connectivity: Bluetooth 5.0
- Compatibility: iOS 9.0, Android 7.0, macOS 10, Windows 10
- Languages: English, German, French, Spanish, Korean, Japanese, simplified Chinese, traditional Chinese
- Software: LaserPecker Design Space & LightBurn
- Certifications: CE, ROHS, FCC, FDA, CDRH, NCC, KC, UKCA, TELEC
- Inputs: DC (24 V, 5 A), AC (100–240 V, 50–60 Hz).
5. Dremel engraver 290-1
Engraving tool with variable working depth, suitable for engraving in a variety of materials such as metal, glass, wood, plastic, ceramics, and more. This set also includes a letter and number stencil, making it easier to engrave lettering.
6. XTool makeblock smoke purifier
The xTool Smoke Cleaner (P5010135) uses 3-layer filtration with high quality activated carbon and HEPA filters to achieve a 99.97% purification rate and remove toxic fumes, dust and unpleasant odours.
The xTool Smoke Cleaner produces no more than 55 decibels* during operation, ensuring a quiet working environment.
Special features
- Size: 420*250*410mm
- Weight: 14kg
- Voltage: 110V AND 220V
- Power: 150W
- MAF: 235m3/h
- CADR: 99.97%
- DB: ≤ 55dB
- Filter life: 3 months*
* Based on test data provided by the laboratory, which may vary depending on actual use of the unit.
7. Proxxon Model maker and engraving set with MM 50/E
Model building and engraving set with drilling and milling machine. Includes collets, power supply, and 34 interchangeable tools. Electronic speed control with stepless speed settings. Quiet and precise operation. Suitable for various attachments such as brushes, cleaning, and derusting. Suitable for use with coolant.
Equipment: 12V power supply. This drilling and milling machine has a diameter of only 35 mm and weighs just 230 g, making it particularly handy. The balanced motor with ground, ball-bearing spindle ensures smooth operation at a pleasantly dampened noise level. Work without rattling and banging. High-quality steel collets hold even the smallest shafts absolutely concentric, preventing any rattling or banging of the interchangeable tools.
Extensive accessories: A diamond grinding pin, a fine cutter, micro drills of 0.5 and 1.0 mm, a brass brush, four grinding pins made of corundum (cylinder, ball, wheel, and cone), a cutting saw blade, two grinding discs made of corundum and silicon carbide each, 20 cutting discs, and a tool holder. Additionally, there are six Micromot steel collets ranging from 1.0 to 3.2 mm.
Operation is carried out with low-voltage safety voltage. Like all machines of this size, the Micromot 50/E operates with low-voltage safety voltage (12 V), which requires a transformer. The manufacturer recommends Micromot power supplies starting from 1.0 A.
Overview: For drilling, milling, grinding, polishing, brushing, cleaning, derusting, cutting, engraving, and signing. Suitable for processing steel, precious metals, glass, ceramics, plastics, and minerals. Ideal for electronics hobbyists, model builders, precision mechanics, jewelry workshops, opticians, arts and crafts, pedicure, dental technology, tool and mold making. Low-voltage safety voltage: also suitable for working with coolant (wet grinding and cutting).
8. Renkforce RF-5169104
With a 4-axis laser for engraving and cutting. Whether for professional applications or personal use, the Renkforce laser engraver and cutter can effortlessly process a variety of materials such as wood, ceramics, leather, painted metal, or stone. Thanks to the 4-axis module, 3D objects like cylinders or trophies can be engraved across their entire surface. Equipped with LD, FAC, and C lenses, and with strong laser power, large cutting and engraving areas can be processed quickly and accurately.
Designs can be created on a PC. Data transfer to the computer can be done via USB or micro SD card. Designs created on the screen can then be implemented in four different engraving modes: black and white, grayscale, outline, or sketch.
Safe operation. The fully enclosed safety cabin with a protective cover and washable air filter prevents the inhalation of fine dust generated during operation and meets the highest health standards. For safety reasons, the device automatically stops when the housing cover is opened.
Comprehensive accessories. In addition to the laser engraver and cutter, the delivery package includes a power adapter, power and USB cables, as well as all necessary accessories.
9. Einhell TC-MT 150 E 4419380 Engraver 150 W
The Einhell TC-MT 150 E grinding and engraving tool is a versatile companion for a wide range of tasks, including engraving, polishing, milling, grinding, cutting, and brushing. With a 6-stage speed control, the power can be flexibly adjusted to the material and specific application, allowing speeds from 10,000 to 35,000 revolutions per minute. The spindle lock enables easy and quick tool changes. Precise results, even for detailed tasks or intricate engravings, are made possible by the pen on the 10 cm long flexible shaft. The engraving pen fits comfortably in the hand thanks to its slim design with soft grip surfaces. The included device holder features practical storage for the shaft and pen, as well as an accessory holder for frequently used attachments. Depending on the need, the grinding and engraving tool can be hung on the wall using the device holder or securely placed on the workbench thanks to its rubberized feet. For tidy storage, a convenient cable winding is integrated into the device holder. The package includes an extensive accessory set with 117 pieces, offering nearly limitless possibilities for various tasks.
10. Creality Laser Falcon - 10W - Air Assist Kit
The strong and stable airflow can effectively blow away smoke and dust, protect the lens of the laser module and ensure the stability of laser energy. The more stable printing performance meets the needs of DIY enthusiasts who require higher quality filaments. Quiet operation. Quiet laser engraving and cutting. Easy to install and use. The thoughtful design of the Velcro makes the whole machine tidier.
Product order
See all products