EUR359,80
Philips Welcome Eye Connect 3
Wi-Fi
Question about Philips Welcome Eye Connect 3
Hello together Do I understand correctly that the doorbell and the screen are wired with two wires OR WLAN? Furthermore, we don't have a socket where the monitor is to go, so I would probably have to add the Philips 24V/5A WelcomeEye Power transformer and wire it from below with stranded wire, right? Thank you
Helpful answer
Good evening, yes you can connect the doorbell using two-wire cabling. The transformer must be connected to 220 V with the corresponding loose cable. The monitor can also be connected with a two-wire stranded cable. However, the system also only works via WLAN or wired or both via WLAN/mobile. MfG
Yes, the doorbell and screen are wired via 2 wires.
However, the transformer has 230V AC on the primary side (input) and 24V DC on the secondary side.
My Sonnerie transformer is installed in the electrical distribution board...
However, the transformer has 230V AC on the primary side (input) and 24V DC on the secondary side.
My Sonnerie transformer is installed in the electrical distribution board...
Yes, two wires are sufficient. You can look at the wiring in the operating instructions. I already had 24V DC with my indoor station, which I used for the screen power supply and 2 wires are connected to the screen and the outdoor station. You need WLAN if you want to open the door with the app via smartphone, you can also control the camera via the app and talk to people outside your front door...