Sensor that combines altimeter and vario in one device. Extremely small, lightweight and inexpensive, as no separate radio link is required compared to conventional devices. The vario/altitude sensor fits in almost any model fuselage. Data such as altitude, climb rate, sink rate and maximum altitude are displayed directly on your transmitter. The sound output of climb and sink can be switched on and off at the transmitter by a freely assignable switch, while the acoustic output of the set alarms remains active. Not only an instrument for glider pilots to find thermals and updrafts, but also for tug pilots. For aerotow, a sound signal can be given after reaching a set altitude. Can be activated or set using MULTImate or "Sensor DataManager "**: Address Address (display line on transmitter) under which the climb rate is displayed Alarm top Upper value of the climb rate at which an alarm is triggered on the transmitter Alarm bottom Lower value of the climb rate at which an alarm is triggered on the transmitter Option Additional output of minimum, average or maximum climb rate Address Option Address (display line on transmitter) under which the option value is displayed Integration Integration time - time interval over which the altitude changes are integrated ... Analog for altimeter (without integration time) Technical data: Altimeter measuring range - 500 ... + 2000 m (from starting point) Resolution altimeter 1 m Measuring range vario +/- 50 m/s Resolution vario 0.1 m/s Dimensions housing (L x W x H) 31 x 20 x 9 mm Weight approx. 10 g.