Top rated RC motors
This page always stays fresh and updates automatically.
1. Hobbywing Speed controller Quicrun 1060
Hobbywing QuicRun WP 1060 60A brush regulator
The regulator is specially designed for beginner and intermediate modelers. It is easy to use but at the same time very robust. It is equipped with automatic throttle calibration. The waterproof and dustproof housing will find use in all weather conditions. Drive in water, snow, dust, or mud without worry!
Reliable hardware combined with advanced software not only ensures high power output but also protects the system from overloads. The QuickRun WP 1060 regulator will find application in many RC vehicles with brush motors. It is dedicated for 1:10 scale models.
Manufacturer: Hobbywing
Model: HW30120201
Scale: 1:10
Continuous / instantaneous current: 60A / 360A
Power supply: 2-3S LiPo / 6-9 Cell NiMH
BEC output: Pulse: 6V / 3A
Input cables: Red - 16AWG - 100mm / Black - 16AWG - 100mm
Output cables: Blue - 16AWG - 100mm *1 / Yellow - 16AWG - 100mm
Input Connector: Large Tamiya connectors
Output connector: Connector 4.0 bullet
Set button on ESC: Inactive
Led Program Box: Inactive
LCD Program box: Inactive
Wifi module: Inactive
Programming port: Jumper Cap
Software update: Inactive
Size: 36.5 x 32 x 18mm
Weight: 39 grams
Dedicated: 1/10th Touring Cars / Buggies / Trucks / Rock Crawlers.
What our customers think
Pro
- Comes in practically every RC car from Tamiya
2. Hobbywing QuicRun 1060 Brushed Regulator T-Connector 60A for 1/10th scale
The QuicRun series from HobbyWing includes brushed and brushless drive systems. The brushless systems also include sensorless and sensor-based drives, so this series offers a suitable solution for every need. The series is also very cost-effective and is primarily aimed at beginners and advanced pilots. It also impresses with the outstanding, well-known quality of the Hobbywing products as well as the uncomplicated commissioning.
Features:
- With modern T-connector
- Water & dust protected for use in any weather & track conditions
- Small size with built-in capacitor module
- Three different driving modes are available:
- Forward / brake / reverse
- Forward / Brake
- Forward / Reverse (also called Crawler Mode)
- Good current carrying capacity
- Built-in switching BEC with high power
- Automatic throttle path calibration
- Easy programming via jumpers
- Various protective functions
- Low voltage protection for batteries
- Thermal overheating protection
- Gas signal loss protection
The controller can be programmed via jumpers.
Operating modes:
- Forward / Brake / Reverse
- Forward / Brake
- Forward / Reverse (also called Crawler Mode)
- Battery type: LiPo / NiMH
HW30120203.
3. Tamiya RS-540 Sport
Thus, it is equally suitable for use in both on-road and off-road environments. It is designed for high RPMs while maintaining low power consumption.
4. Tamiya RS-540
The RS-540 Torque-Tuned electric motor from Tamiya is a powerful option for RC vehicles that seek improved acceleration and higher top speeds. With an optimized design that sits between a standard Type 540 motor and a sport-tuned motor, this motor delivers outstanding performance when used with standard gear ratios. The RS-540 features a no-load speed of 2250 kV and has a maximum current draw of 10 A, making it ideal for operation with 6-cell NiMH or 2S LiPo batteries. The motor's construction includes a shaft diameter of 3.17 mm and a compact design, making it suitable for various RC applications. Thus, the RS-540 is an excellent choice for hobbyists who value performance and reliability.
- Optimized performance between standard Type 540 and sport-tuned motor
- No-load speed of 2250 kV for improved efficiency
- Maximum current draw of 10 A for reliable operation
- Suitable for 6-cell NiMH or 2S LiPo batteries
- Compact design with a shaft diameter of 3.17 mm.
5. Hobbywing Quicrun Fusion Combo
The future is here, as Hobbywing introduces the QuicRun Fusion, the first motor for 1/10 rock crawlers that features an integrated controller. Often, space in the vehicle is very limited, leaving little room to neatly arrange the various cables. But that is finally a thing of the past. Just about the size of a typical 550 motor and weighing 210 g, you won't even notice that the motor and controller are combined. Thanks to the intelligent torque and speed control, a crawler can easily adapt to any situation. This combination is supported by an excellent waterproof and dustproof casing, allowing for limitless fun. Even the electronic switch is appropriately protected. The technology used is called FOC (Field-Oriented-Control), which is responsible for this superb control feel. With sinusoidal motor control, both the controller and motor remain cooler, achieving a silky smooth and quiet motor operation.
What our customers think
Pro
- 2300 kv faster for rock racers
- Well packaged
- very slow also good
6. Hobbywing Quicrun Fusion
The QuicRun Fusion Pro is the evolution and improvement of Hobbywing's first 2-in-1 combo, the standard Quicrun Fusion. 1/10 crawlers now benefit from a space- and weight-saving motor and controller combined into one unit. Now even stronger and better. Often, space in the vehicle is limited, leaving little room to neatly arrange the various cables. But that is finally a thing of the past. With a length of only 58 mm, which is just about the size of a typical motor, and a weight of only 209 g, you won't even notice that the motor and controller are combined. Thanks to the intelligent torque and speed control, a crawler with this combo can easily adapt to any situation. Of course, the Fusion Pro is equipped with an excellent waterproof and dustproof casing. This means that the fun truly knows no bounds. Even the electronic switch is appropriately protected. The technology used is called FOC (Field-Oriented Control) and is responsible for this superb control feel. The power of this drive has increased by a solid 8% compared to its predecessor, and power consumption has even been reduced by 30%. This results in less battery capacity being used and extended driving time.
Features:
- 2-in-1: Motor and controller combined
- Compact design ideal for saving space and reducing weight
- Noticeable power improvement
- FOC drive, ideal for crawlers
- 3 operating modes: Normal (Forward, Reverse with Brake), Normal (Forward, Reverse).
What our customers think
Pro
- a little shorter than 1800 kv
- Well packaged
- very slow also good
7. Hobbywing Programming box
This LED programming box is suitable for programming HobbyWing brushless controllers. The programming of the controllers is simple and quick with this LED programming box. Small enough to always have it ready for use.
Compatible with the following HobbyWing products:
- Platinum V1/V2 series and FlyFun V5 series of brushless flight controllers
- XeRun series (most), EzRun, and QuicRun series of brushless car controllers
- SeaKing series of brushless boat controllers
Technical specifications:
Note: If the controller does not have a BEC, an external BEC or a battery is required for operation.
Dimensions: 88 x 58 x 14 mm
Weight: 40 g
Input voltage: 4.8 V - 8.4 V.
8. Tamiya ESC TBLE 04S
The Tamiya TBLE-04S controller is a versatile electronic speed controller suitable for both sensored brushless motors and brushed motors. With a maximum continuous current of 75 A, it supports motors starting from 23T and is ideal for use in vehicles with limited space. The controller can be operated with 6-cell NiMH (7.2 V) or 2S LiFe (6.6 V) batteries, allowing for flexible adaptation to various application needs. Thanks to its compact dimensions of 41.5 mm x 33.4 mm x 18 mm, it is particularly space-saving and can be easily integrated into different vehicle models. The TBLE-04S also features built-in overload and overheating protection to ensure the safety and longevity of the motor. With an integrated BEC that provides a voltage of 6 V and a maximum current of 1.5 A, this controller is a reliable choice for RC enthusiasts.
- Suitable for brushed and sensored brushless motors
- Maximum continuous current of 75 A, supports motors from 23T
- Operable with 6-cell NiMH or 2S LiFe batteries
- Built-in overload and overheating protection
- Compact dimensions for easy integration into vehicles.
9. O.S. Engines Candles No. 7 (Medium-Hot)
Which glow plugs are suitable for which engines and applications?
A cold glow plug should be installed in engines with high displacement, during full throttle operation, when using fuels with a high nitromethane content, in high ambient temperatures, or when cooling is inadequate.
Medium "standard" glow plugs are recommended for low fuel nitration, in engines with low compression and power. The medium glow plug type is usually the most affordable all-round plug and should be the first choice when tuning for a specific engine type.
Hot glow plugs are advisable when the engine exhibits poor idle characteristics, when little nitromethane is used, in engines with low displacement, in very low ambient temperatures, or when the engine is predominantly operated in partial load conditions.
10. O.S. Engines Candles Os 3a
Designation previously A3
Which glow plugs for which engines and applications?
A cold plug should be installed in engines with high displacement, during full throttle operation, when using fuels with a high nitromethane content, in high ambient temperatures, or when cooling is inadequate.
Medium "standard" plugs are recommended for low fuel nitration, in engines with low compression and power. The medium glow plug type is usually the most affordable all-round plug and should be the first choice when tuning for the specific engine type.
Hot glow plugs are advisable when the engine has poor idle characteristics, when little nitromethane is used, in engines with low displacement, in very low ambient temperatures, or when the engine is primarily operated in partial load conditions.
Product order
See all products