Best selling Model railway electronics
This page always stays fresh and updates automatically.
1. Märklin 07198 H0 Power feed
The Märklin 07198 H0 power supply is an essential accessory for model railways, specifically designed for the interior lighting of model 7077. This product is suitable for the H0 gauge and is aimed at model railway enthusiasts aged 15 and older. The power supply enables a reliable and efficient energy supply for the lighting elements, significantly enhancing the detail fidelity and overall experience of the model railway. Made in Germany, this product combines high-quality materials and precise craftsmanship to meet the demands of model railroaders. The use of metal and copper ensures a durable and stable connection, which is essential for the operation of the interior lighting. The Märklin 07198 H0 power supply is therefore a valuable addition to any H0 model railway project.
- Designed for the interior lighting of model 7077
- Made from high-quality materials such as metal and copper
- Suitable for model railway enthusiasts aged 15 and older.
2. Märklin 60977 mSD/3 sound decoder without
For retrofitting Märklin/Trix H0 locomotives with built-in high-performance motors or other DC motors. The Märklin SoundDecoder3 features a 21-pin interface and comes with a matching interface board for upgrading both analog and digital locomotives. The Märklin SoundDecoder3 supports the digital formats mfx, MM1, MM2, and DCC. Pre-installed sound of an electric locomotive.
3. H-Tronic Automatic pendulum hoist Ready-made
An automatic pendulum operation on a branch line enlivens any model railway setup. When the train reaches its stopping area, it is sent back on its journey in the opposite direction after the set waiting time. When the train enters the separation section, it stops according to the set time and then returns to the other end of the line. The necessary polarity reversal for the change of direction occurs automatically with this module.
4. Roco Z21 Dual Booster
Roco 10807 Z21 Dual Booster Digital Booster.
5. Sol Expert CarSystem lighting set 9044
To operate white LEDs in wire-guided vehicles with only two NiMH batteries, this small circuit is useful. It allows for the complete vehicle lighting to be realized using white and red LEDs. No additional resistors are required. The circuit can be powered by one (1.2 V) or two (2.4 V) NiMH batteries. The LEDs are connected in parallel to the corresponding outputs for red or white LEDs. Naturally, other colors can also be used here.
6. Tams Mini timer ready made electric
A short signal applied at the entrance of the circuit triggers a signal at the output that lasts from 1 to 100 seconds. The duration can be adjusted using a controller. The outputs can directly control a relay.
7. Viessmann H0 ceiling spotlight finished model
The H0 ceiling spotlight from Viessmann is a ready-made model specifically designed for indirect lighting of canopies in model railway layouts. With its compact design and modern LED technology, this product offers a maintenance-free lighting solution. The ceiling spotlight is ideally suited to create a realistic and appealing atmosphere in your model railway setup. By using high-quality materials and precise craftsmanship, the spotlight ensures a long lifespan and reliable functionality. Its easy integration into existing model railway systems makes it a practical choice for model builders.
- Indirect lighting for canopies
- Maintenance-free due to LED technology
- Compact design for easy integration.
8. Josef Barthelme Special incandescent lamp yellow 16 V 211
The special bulb Yellow 16 V 211 from Josef Barthelme GmbH & Co is a high-quality lighting solution specifically designed for model railways. With a length of 6 millimeters and a width of 2.3 millimeters, this lamp offers a compact design that can be easily integrated into various models. The yellow color group of this lamp allows for the creation of realistic lighting conditions, which can be used, for example, to simulate fire or other light effects. The lamp is equipped with free wire ends, enabling flexible installation and adjustment to individual needs. This special bulb is suitable for individuals aged 15 and older and represents a valuable addition for any model railway enthusiast who values attention to detail and authenticity. Using this lamp can significantly enhance the atmosphere and visual experience of model railway layouts.
Model railway electronics
Quantity discount
EUR5,62
Josef Barthelme Special incandescent lamp yellow 16 V 211
9. Märklin 72025
The new powered short coupling head is specifically designed for newly constructed vehicles with a prototype-appropriate lower buffer beam and thus a lower buffer height from the rail top, to ensure the necessary swinging of the short coupling system below the buffer plates. Contents: 10 powered short coupling heads. For use in vehicles with standard coupling sockets and guide mechanisms, as well as in vehicles with lower buffer heights.
10. Tams Flasher electronics warning lights ei
The alternating flashers control LEDs that simulate warning lights at railroad crossings, in emergency vehicles, and at danger points. The two outputs of the circuit are switched on and off alternately. LEDs can be connected directly to the two outputs of the circuit, the required series resistor is integrated on the circuit.
Product order
See all products