Line-interactive UPS, 750 VA / 500 W, with network card. Continues to supply power during a power outage. Up to 500 watts of output power. Surge protection up to 459 Joules. Connections: 4x C13, 1x C14. Management: USB, RJ-45 10/100 Base-T, RJ-45 Serial, SmartSlot (AP9631 pre-installed). Alarm during battery operation: Dedicated alarm for low battery charge, configurable delays. The APC Smart-UPS series protects your critical data with reliable, uninterruptible power supply. The SMT750RMI2UNC in a rack-mounted case offers 750 VA capacity with a maximum output power of 500 watts. In the event of a power failure, the device ensures independent power supply for 5 to 16 minutes (at 100%/50% load). Intuitive operation, easy management. The LCD display always shows the most important parameters such as operating mode and efficiency, voltage, frequency, and energy consumption. A clear menu provides intuitive access to all functions. Thanks to the pre-installed network management card, you can remotely manage the system immediately after commissioning. For on-site management, there are USB and Serial RJ45 interfaces available. Low maintenance. The sealed lead-acid battery with gelled electrolyte is completely maintenance-free. The UPS calculates the expected battery life and detects premature aging through regular battery tests. The charging voltage is adjusted according to the battery temperature, allowing for particularly gentle charging, which positively affects the battery's lifespan. High efficiency. High efficiency helps to keep power consumption and cooling requirements low, thereby benefiting both the environment and your budget.