The Aqua Computer High Flow 2 flow sensor can be easily integrated into the cooling circuit and allows for continuous flow measurement. This flow sensor is additionally equipped with a temperature sensor to monitor the coolant temperature. The flow measurement is carried out via a rotor/impeller driven by the flowing coolant. The rotational speed is detected contactlessly through a magnetic measurement system. An optimally calibrated bearing play for each sensor ensures minimal operational noise. The sensor provides reliable measurements from approximately 35 l/h to 1000 l/h, making it ideal for most water cooling systems. Its symmetrical design allows the sensor to be integrated into the system without regard to flow direction. Additionally, the sensor can be operated in any installation position. The very low flow resistance meets the requirements of high flow systems. The High Flow 2 has significantly more compact dimensions than its predecessor. Housed in a stylish Acetal casing, the flow sensor is integrated with a very accurate and fast water temperature sensor. The stainless steel cover of the sensor is magnetically attached without screws. The connection threads are made in G1/4, allowing operation with a wide range of hose systems. Three M3 threads are integrated into the base for securing the sensor, with matching screws included in the package. Technical specifications: Dimensions: approximately 51 x 41 x 31 mm, connection thread G 1/4. A device with a flow sensor input is required to evaluate the flow signal; this is not included! Package includes: one flow sensor, one connection cable, three screws M3 x 6 mm.